PDF download Download Article
Free your steering wheel up with these simple solutions
PDF download Download Article

In a lot of cases, a locked steering wheel is a minor problem caused by the steering column being jammed at an awkward angle against the ignition cylinder (whether it’s a keyed or push-to-start ignition). But simple problems can have kind of goofy and strange solutions, so you aren’t alone if you’re scratching your head a bit. Here, we’ll start by outlining the normal, quick fix for push-to-start vehicles. If it doesn’t work for you, troubleshoot through the other solutions we include below. Alternatively, if you happen to have a keyed ignition, jump to the bottom of the article for the help you need. Let's dive in!

Things You Should Know

  • Make sure your battery isn’t dead and confirm you aren’t having power steering problems—both of which will lock your steering wheel.
  • Don’t press the brake when you turn the accessory power on. Gently move the steering wheel to unlock it.
  • If you have a traditional key (not a push-to-start), try your spare and spritz WD-40 in the ignition to loosen up the switch.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Method 1
Method 1 of 3:

Disabling a Lock on a Keyless Vehicle

PDF download Download Article
  1. The steering wheel on vehicles will occasionally lock up when the steering column and the ignition don’t line up. This often happens when you turn the vehicle off without lining the wheels up straight. To fix this, do not press the brake the same way you normally would starting the car. [1]
  2. On some vehicles you’ll need to press the start button twice. So long as you’ve got the remote key on hand, your vehicle will recognize that it’s okay to turn the electrical/accessory systems on. [2]
    • If you hold the brake down and press the start button, your vehicle will normally try to start. But if your steering column is out of alignment, you won’t be able to run the wheel. This shouldn’t happen with the electrical on since the vehicle won’t worry about rolling.
    Advertisement
  3. With the electrical systems on, gently jiggle the steering wheel. If it comes loose, start the vehicle by pressing the brake and the start button and you should be good to go. [3]
    • If the steering wheel won’t turn, try starting the vehicle anyway. Even a slight adjustment can fix a goofy column alignment. If you still can’t turn the wheel though, it’s time to take the vehicle to the mechanic.
  4. Advertisement
Method 2
Method 2 of 3:

Troubleshooting Other Solutions for Keyless Vehicles

PDF download Download Article
  1. Jump your battery if your entire vehicle is disabled and nonresponsive. If your steering wheel is locked up and the push to start button isn’t doing anything, it’s possible that your battery is just dead. Contact a friend, family member, or neighbor and ask them to help you jump your battery. With both vehicles off, connect the positive terminal of the dead battery to the positive terminal of the donor battery. Then, attach the negative terminal to the donor battery to the dead battery. Wait a minute, start the donor car, and then start your vehicle. [4]
    • Remove the cables in the opposite order that you attached them.
    • Let your vehicle run for a few minutes to give your vehicle’s electrical systems time to stabilize.
  2. If your vehicle turns on but you can’t turn the steering wheel, it’s possibly stuck due to a power steering issue. Perhaps your vehicle’s power steering lines are damaged, or maybe you’ve run out of power steering fluid entirely. If you know your way around the engine bay, check your power steering fluids to confirm the issue. [5]
    • If you aren’t a gearhead and you’ve got a power steering error code, get your vehicle towed to a mechanic.
    • There’s also a thin chance that you can’t turn the steering wheel because your serpentine belt is completely disconnected and needs to be replaced , but this will almost always happen while you’re actively driving—not when your car is off and parked.
  3. Some vehicles lock the steering wheel for safety reasons if they detect a break-in, there’s a problem with the ignition control, or there’s something going on with your engine that makes it unsafe to drive. Before you start disassembling the steering column or messing with the ignition, consult your driver’s manual to see if there’s a model-specific solution. [6]
    • This is especially likely if your vehicle turns on but your steering wheel won’t even budge a little bit. You may even get some kind of warning chime or indicator to let you know a problem needs to be addressed.
  4. Advertisement
Method 3
Method 3 of 3:

Unlocking a Keyed Ignition

PDF download Download Article
  1. If you turned the vehicle off when the ignition and steering column were misaligned, you may just need to jiggle the key a bit to get the ignition column to unlock . Put one hand on the steering wheel and stick the key in the ignition. Slowly turn the key while gently moving the wheel back and forth. Continue applying light pressure until your wheel unlocks and you can start the car. [7]
    • Do not turn the key with a lot of force—this doesn’t require a lot of effort, and turning the key too hard may bend it.
  2. If you’ve got a spare key lying around somewhere, test that before moving on to more serious or involved repairs. Grab your spare key and try using that to unlock your steering wheel and start your car. If it works, the grooves of your primary key are worn down and you’ve got a key problem, not a steering wheel problem.
    • Feel free to use your spare key to get around. You should get a second copy made soon, though.
  3. Spritz WD-40 in the ignition if it won’t turn smoothly. If your key is sticking in the column and that resistance is preventing you from turning the vehicle on, grab a can of WD-40 or any other silicone lubricant. With the vehicle off, spray a dash of WD-40 into the keyhole. Move the key in and out to spread the lubricant around and then try turning the vehicle on. [8]
    • If this works, you just had some dirt or debris inside the keyhole. However, it could be a sign that you’re coming up to the end of the life for your ignition module, so you may need to make that repair soon.
    • If the key won’t go in all the way, skip the WD-40 and try blowing compressed air in the ignition opening. This may knock out whatever debris is blocking your way.
  4. Replace the ignition switch in the steering column as a last resort. If you still can’t turn the key, it’s possible the entire ignition assembly needs to be replaced. Purchase a replacement ignition switch for your vehicle and unscrew the fasteners on your dashboard to unlock the panels. Pry the panels out until you can access the ignition cylinder and replace it before reassembling your dashboard. [9]
    • You can also go to a dealership to have them replace this one and cut you new keys.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car issues, check out our in-depth interview with Hovig Manouchekian .

      About This Article

      Thanks to all authors for creating a page that has been read 44,268 times.

      Reader Success Stories

      • Anonymous

        Apr 3

        "Thank you so much for explaining."
      Share your story

      Did this article help you?

      Advertisement