Download Article
Download Article
A wood stove is a cozy way to heat up a room or an entire house, but using one can be frustrating if you’ve never done it before. The important things to remember are that you want a hot and fast fire, which is most efficient, and that fire needs oxygen in order to burn. It’s also important that you never leave a fire unattended, and never let children play near the wood stove.
Starting a Fire in a Wood Stove
- Add a few logs of wood that have dried for about 6 months.
- Open all the control valves to allow oxygen flow.
- Add some kindling, like newspaper.
- Use a match or lighter to set the kindling on fire.
- Close the door and adjust the valves to keep the fire going.
- Add new logs as needed.
Steps
-
Read the manufacturer’s instructions. Many wood stoves come with specific directions from the manufacturer. You should read these before starting a fire in your wood stove to ensure that you're doing it properly and safely. [1] X Research source
- If you don’t have the manual for your stove, check the manufacturer’s website for a copy.
-
Choose the right fuel. The best wood to use is seasoned wood that’s been drying for at least six months. Fresh wood contains too much water, and burning it will waste wood and money. Moreover, wet wood creates lots of smoke, and lots of creosote buildup.
- Creosote is a combination of chemicals made up of unburned fuel. This material can build up in your chimney and can lead to chimney fires.
- In terms of type of wood, you can choose between hardwood and softwood. Hardwoods that come from deciduous trees are denser and produce a hotter and longer burn, so they're ideal for cold winters. Softwoods are less dense, so they produce a cooler fire that’s great for cool spring or fall nights. [2] X Research source
- Fireplace wood can be found at many convenience stores, gas stations, hardware stores, grocery stores, garden centers, wood suppliers, and online.
Advertisement -
Open all the controls. Oxygen is one of the things that a fire needs to burn, and many wood stoves have one or more levers you can use to control valves that allow air into the firebox. When you're starting a fire, you want all the valves fully open. [3] X Research source
- The primary source of air in many wood stoves is an air intake under the grate that provides oxygen to the fire bed. Many wood stoves will have a lever under or beside the door that controls this valve.
- Stoves may also have a secondary air valve above the firebox to provide oxygen to the flames, as well as a damper that opens and closes the flue.
-
Put in some kindling. The best way to get a fire going in a wood stove is to start with small pieces of wood that can increase the temperature inside the firebox and get the flames burning. To set up the kindling:
- Crumple up five or six pieces of newspaper. Make sure the paper is dry.
- Place the newspaper balls into the center of the firebox.
- Lay up to 15 pieces of kindling on top of the paper. Make sure the pieces of wood are dry and small. [4] X Research source
-
Light the fire. Use a lighter or match to ignite the newspaper under the kindling. Light the paper in a few places, starting at the back and working your way toward the front. This will prevent you from burning yourself as you pull your hand out of the firebox.
- Leave the door to the wood stove open for about five minutes to ensure the fire gets enough fresh air. [5] X Research source
- As the paper burns, it will ignite the kindling pieces on top, and this will get the fire going.
-
Add some small logs. Once the kindling has begun to burn, you can add some smaller logs to the fire when the original flames start to die down. Add at least three small logs to the fire, one at a time to avoid smothering the flames.
- When you add wood to the fire, loosely stack the logs so that air can surround them as much as possible.
- Close the door most of the way, but leave it unlatched for about 15 minutes to prevent the fire from being smothered as it establishes itself. [6] X Research source
- Once the fire is fully established, after about 15 minutes, you can close and latch the door.
Advertisement
-
Keep the door closed. Each time you open the door, it allows heat to escape from the stove, and this will result in a cooler and less efficient fire. Moreover, opening the door can allow smoke to escape into the room too, which is bad for people’s health.
- Once your fire is burning, the only time you should open the door is when you're adding more wood. [7] X Research source
- Open the door slowly to prevent a blast of fresh air from rushing into the stove and creating smoke.
- Keeping the door closed will also prevent sparks and embers from shooting out, and this is important because these can cause burns or start fires.
-
Add larger logs. After you’ve added some small logs and let the fire establish itself, you can add larger logs to the fire. When the flames from the smaller logs start to subside, add about three larger logs to the fire.
- When those logs have burned down and are mostly embers with some visible flame, then it’s time to add more logs. [8] X Research source
- Don’t add more than five logs at a time. Adding too much wood at once will partially smother the fire and leave fuel unburned, and this leads to smoke and creosote buildup.
-
Close the air intakes partially. After about 20 minutes, when the fire is established and burning well, reduce the amount of air going into the firebox. This will provide the fire with enough air to keep burning, but will stop it from blazing and burning too quickly. [9] X Research source
- Close the air valve levers so that they're open about one-third of the way. This includes the primary air, secondary air, and the damper.
- Never close the secondary air valve or damper completely. This can lead to tar, soot, and creosote buildup in the chimney. [10] X Research source
-
Use fans to circulate the heat. The point of a wood stove is to heat a house, and you can help this process along by using fans to blow hot air from the stove around the house. [11] X Research source
- There are many stovetop fans you can buy that sit on top of the wood stove and blow the heat outward.
-
Use proper safety precautions when using the wood stove. Fires are great for providing comfort and warmth, but fire can be dangerous and must be treated as such. There are many things you can do to keep your home and family safe, including:
- Keep children and pets away from the stove when there's a fire burning. The metal of the woodstove will be extremely hot, and can cause burns. The easiest way to keep kids and animals away from the stove is to install a fence or safety gate around it.
- Keep all combustible materials at least 3 feet (90 cm) away from the wood stove. This includes fuel, kindling, papers and books, and furniture.
- Have a fire extinguisher installed in the same room as the wood stove.
- To have an overnight fire, open the air valves and add some large pieces of hardwood to the fire. Let the fire burn for about 25 minutes, and then close the valves to their regular spot. This will prevent smouldering, which leads to smoke and creosote buildup. [12] X Research source
- Let the fire die out naturally rather than throwing water on it. Once the fire has died down and there are only embers left, you can leave the fire to die out on its own.
Advertisement
-
Burn seasoned wood only. For the health and safety of your home and family, and the maintenance of your wood stove, you shouldn’t burn anything but seasoned wood in your stove. You can use plain paper or newspaper as kindling, but don’t burn things like: [13] X Research source
- Wood that’s wet, green, painted, or pressure treated
- Garbage
- Plastic
- Cardboard
- Coal
- Particle board or plywood
- Wood pellets
- Gas, lighter fluid, or any other fuel
-
Clean out the ashes regularly. When the ashes build up under the grate or in the bottom of the firebox, you should clean them out. Too much ash in the bottom will impede the airflow, meaning your fire won’t get the oxygen it needs. To clean the ashes, use a shovel or brush to sweep the ashes into a metal bucket. Take the ashes outside immediately and add them to your garden or compost.
-
Clean the firebox weekly. When you're using the wood stove on a regular basis, clean inside the firebox once a week. To clean it, scrub the inside with a stiff-bristled brush to remove soot and other residue.
- When you’ve scrubbed the inside, vacuum out any ash and soot from around the base of the stove.
-
Have the stove inspected annually. To make sure your wood stove is properly cleaned and to prevent chimney fires, call in a professional chimney sweep once a year. This person can also inspect the stove, pipes, and other components for damage and corrosion.
- The best time to have your chimney swept is before summer, because heat and humidity can mix with carbon residue and create acids that eat away at your wood stove components.
- You should also inspect your wood stove regularly for rust, cracks, and other signs of damage. [16] X Research source
Advertisement
Community Q&A
Search
-
QuestionIs a wood burning stove safe on a park home site?Community AnswerYes, they're safe everywhere, provided they're installed correctly and cleaned religiously. However, the park may not allow them. So, obtain permission and any specific guidelines first.
-
QuestionI have a Timberline wood stove, and I need to take down the stove pipe to clean it. How do I get that down? It has two 90 degree angles in it.Community AnswerIf you've never done it before, then call a chimney cleaning company and have them clean it. There are many different types of piping and connecting methods. Pay close attention to what they do to handle yourself in the future. The entire pipe must be cleaned regularly, which is determined by your frequency of use. Ask for a suggested cleaning interval based on your use and types of wood or other fuel used.
-
QuestionTo minimize the release of hot gases, do I have the damper fully open or partly closed?David WebbCommunity AnswerWhen you first light the fire, it is best to have the damper fully open. Once the fire is burning consistently, set the damper at about halfway. This allows enough oxygen for the fire to burn hot without flaring and burning too quickly. If you want the fire to burn overnight, you can put some larger wood on and get it burning properly, then close the damper to slow the burn right down. In the morning, you should be able to rake out the coals and add some kindling to get it going again.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.bcairquality.ca/topics/stove-burning-practices.html
- ↑ https://www.lovetheoutdoors.com/types-of-firewood-softwood-vs-hardwood/
- ↑ https://www.stovesonline.co.uk/lighting-and-using-a-woodburning-stove.html
- ↑ https://www.bcairquality.ca/topics/stove-burning-practices.html
- ↑ https://www.napoleon.com/en/ca/fireplaces/blog/how-start-wood-fire
- ↑ https://www.cottagetips.com/tips/wood-stove-tips/
- ↑ https://www.youtube.com/watch?v=pC67gBhWu0Y
- ↑ https://www.stovesonline.co.uk/lighting-and-using-a-woodburning-stove.html
- ↑ https://www.napoleon.com/en/ca/fireplaces/blog/how-start-wood-fire
- ↑ https://www.telegraph.co.uk/finance/property/advice/10574430/Top-tips-for-using-a-wood-burning-stove-this-winter.html
- ↑ https://www.bcairquality.ca/topics/stove-burning-practices.html
- ↑ https://intl.jotul.com/guides-and-tips/wood-heat-source/eight-tips-burning-wood
- ↑ https://www.bcairquality.ca/topics/stove-burning-practices.html
- ↑ https://www.cottagetips.com/tips/wood-stove-tips/
- ↑ https://www.napoleon.com/en/ca/fireplaces/blog/how-start-wood-fire
- ↑ https://www.cottagetips.com/tips/wood-stove-tips/
About This Article
Article Summary
X
To use a wood stove, start by opening the damper valve underneath the grate so that the fire gets enough oxygen. Then, put some crumpled newspaper in the middle of the firebox, followed by 15 pieces of small, dry kindling on top. Next, use a lighter to ignite the newspaper, and leave the stove door open to give the fire air. Once the kindling is burning, add some small logs to the fire and close the door after about 15 minutes. After another 20 minutes, close the damper about halfway so that the fire doesn’t burn too quickly and will last longer. For tips on how to clean and maintain your wood stove, keep reading.
Did this summary help you?
Thanks to all authors for creating a page that has been read 423,425 times.
Reader Success Stories
- "We have just bought out first log-burner, and we were getting very frustrated because it would not burn for long before going out. Realized that the secondary vent was closed. Opened it, and off it went. Great, thanks for the info!" ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"We have just bought out first log-burner, and we were getting very frustrated because it would not burn for long before going out. Realized that the secondary vent was closed. Opened it, and off it went. Great, thanks for the info!"
..."
more
"Great article. I am in total fear of using the wood stove in my bedroom, but after reading these steps. I feel better qualified to use it on the frigid New England nights and days."
..."
more
"Having read the steps to using a wood burning stove, I managed to get it working much more efficiently."
"Clear and detailed without making me feel stupid."
"All great ideas. I liked it. "
