Download Article
Download Article
Academic hoods are often worn during commencement ceremonies and graduation events as part of the ceremonial regalia. Unlike other hoods, academic hoods are meant to hang down low on the back and around the neck. Properly wearing these hoods can be the most difficult part of the graduation ceremony. However, if you know how to make the proper folds in your hood, it’s easy to make your overall appearance fit the importance of the occasion.
Steps
-
Determine your university’s policies for hoods. How you wear your hood will depend on your whether you put it on yourself, or a professor places the hood on you at your ceremony. If you’re participating in a hooding ceremony, you may need to drape your hood over your arm or shoulder while you wait for it to be placed over your neck. Ask your university about your specific hooding timeline and instructions.
-
Unfold your hood. Your hood will likely come folded up in a plastic bag or on a hanger. Shake out the hood so it’s fully extended. Then place it on a flat surface so you can ensure that it’s properly prepared before you put it on or drape it over your arm or shoulder. [1] X Research sourceAdvertisement
-
Turn out the velvet lining. Your hood will have a velvet lining that extends down from the top, or where you’ll be putting your head. This brightly colored velvet indicates your degree, so it should be facing out. You don’t want to hide the colors that show your accomplishments! [2] X Research source
-
Turn out the satin trim. About halfway down the velvet lining, most hoods will have a satin trim that reflects the school colors. Fold this out so that the velvet remains visible on the top half of the hood, and the trim is showing on the bottom half. Hoods will also generally include a small button and cord that you can secure horizontally across this halfway-point to keep the satin trim visible. [3] X Research source
- This fold should be right below your shoulder blades when the hood is placed over your head.
-
Place the hood over your head. An academic hood is meant to drape down your back. You should also make sure the small, pointed end of the hood, usually also lined in velvet, is laid flat at the base of your neck. [4] X Research source
- Remove your graduation cap or tam when you put on your hood, as you don't want your hat to get tangled up in your hood.
-
Secure the hood using the cord and a button or pin. Most hoods include a small cord that hangs off the triangular end that goes around your neck. Loop this cord around a shirt button or a purposefully made button inside your graduation gown to keep the hood safely in place. Once the hood has been secured to your clothing or the inside of your academic gown, you may close your robe. [5] X Research source
- If you are not wearing a shirt or dress with buttons and your gown does not come with a specially made button, you can use a safety pin instead.
- If your hood doesn’t come with a cord, or the cord breaks, use a thick needle and sturdy yarn to create a homemade cord. Be sure to use a color that won’t clash with the hood, likely black.
-
Ask a family member or friend to check the folding. You may jostle the folding when you put the hood over your head. Because it will be out of easy reach once it’s down your back, you’ll want another person handy in case they need to fix it.
Advertisement
-
Bring your academic hood to the graduation ceremony. Your superiors, professors, and school heads will award you with your achievement by placing your earned academic hood on you during the ceremony.
- At some universities, you will not need to carry your hood with you. Instead, you will be expected to drop off your hood ahead of time. Follow your university's commencement instructions closely.
-
Drape the folded hood over your arm or shoulder. You’ll want your hood folded in half with the turned-out velvet lining fully visible. The velvet strip should be at the front of your arm, facing outward. The narrow, or neck, end should be facing out from your body. [6] X Research source
- If the hood includes a button and cord, such as for the satin lining, be sure these are unfastened. Your professor will secure them for you during the ceremony.
-
Carry your draped hood to the stage. You’ll need to check on your program’s policies to be sure you use the correct arm. Most will require you to use to the arm closest to the adorner and furthest from the audience, usually the left. Some university ceremonies, however, may want you to drape your hood over the right arm. [7] X Research source
-
Face away from your adorner and remove your cap. Your hat can get in the way of the hooding ceremony. Remove it and then turn your back to the adorner. This will allow your adorner to smoothly affix the hood to your robes.
-
Allow your adorner to hood you. Your adorner will lift the hood over your head and place it on your shoulders. They will then align the cord with your neck. Your adorner will place the velvet lining along your shoulders so the hood flows smoothly down your back and turn the bottom half of the hood out so the satin lining shows. Finally, the adorner will fasten the cord across the middle of the hood to secure the fold.
Advertisement
-
Purchase or rent academic regalia. Most universities will give you the option of either purchasing or renting academic regalia. For most people, renting academic regalia is more cost effective. However, if you are planning on becoming a professor, you might be expected to wear regalia as a faculty member at future events. In that case, purchasing your own regalia might be more efficient. [8] X Research source
-
Consult your university policies about regalia. Many universities have a specific provider of academic regalia and will not permit you to purchase regalia elsewhere. Other universities will allow you to buy or rent regalia from any provider you choose, or perhaps borrow regalia from an alumna. Always adhere to your specific school's regalia requirements so that you are allowed to participate fully in commencement exercises.
-
Tell your regalia provider which degree you’re earning. Different types of degrees require varying academic hoods. To make sure that you acquire the correct kind of hood, inform your provider whether you are earning an Associate's degree, Bachelor's degree, Master's degree, or Doctoral degree.
- An Associate's degree hood is usually worn flat against the back like a cape or cowl. Note that Associate's hoods are not as commonly worn as graduate degree hoods--you might not need a hood to be a part of your regalia. [9] X Research source
- A Bachelor's degree hood is 3 feet long and does not end in a sharp point. Note that Bachelor's hoods are not as commonly worn as graduate degree hoods--you might not need a hood to be a part of your regalia. [10] X Research source
- A Master's degree hood is 3.5 feet long and comes to a point at the bottom. [11] X Research source
- A Doctoral hood is the longest hood at 4 feet long. It has the sharpest point and also the largest trim of all hoods. [12] X Research source
-
Provide your seller with the name of your institution. If you’re not using the university provider, it’s important to double check that your regalia adheres to school standards. Make sure that your regalia provider has all the relevant institutional information so that you match your fellow graduates.
-
Inform your provider of your field. American universities have a standard set of colors that indicate your field of study, rather than just your degree. These fields determine the color of the velvet trim that lines your hood. European universities are not standardized in the same way as American universities. Check with your institution to make sure you are purchasing the correct academic hood. [13] X Research source
- Law students, for example, wear hoods trimmed in purple, while all Ph.D. students wear hoods trimmed in royal blue.
Advertisement
Community Q&A
Search
-
QuestionIf I have three different bachelor's degrees, what can I wear on an academic hood to show all three properly?Community AnswerIt's best to consult with your university to ensure that you're properly displaying all of your academic achievements. If you have multiple majors or belong to honor's societies, for example, there may be cords you should wear to indicate your membership. While a hood alone might not be able to show that you've got three degrees, there may be other options your program can help you find.
-
QuestionAm I entitled to wear a Bachelor's hood after commencement if I do not wear it during the commencement?Community AnswerThere is no hood for obtaining a Bachelor's degree, so you will not need to worry about this dilemma.
-
QuestionTen years ago I bought my MA hood, and now I have purchased a hood to mark the completion of my PhD. Can I wear them both at the graduation ceremony, or just the PhD?Community AnswerYou may wear both because you earned them both, or you can choose one or the other. No one should have any problem with that.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Every institution and every degree involves a different costume and different customs. Make sure you double check the commencement and regalia requirements well ahead of time so that you do not make any mistakes.Thanks
- It is not typical to wear or be presented with an academic hood for a bachelor's degree, so check with the institution in which you are graduating if this is necessary.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://static.scs.georgetown.edu/upload/kb_file/Graduation_Apparel_How_To_Guide_SCS.pdf
- ↑ https://www.madonna.edu/pdf/univres/academic_regalia_2018.pdf
- ↑ https://www.madonna.edu/pdf/univres/academic_regalia_2018.pdf
- ↑ http://static.scs.georgetown.edu/upload/kb_file/Graduation_Apparel_How_To_Guide_SCS.pdf
- ↑ http://static.scs.georgetown.edu/upload/kb_file/Graduation_Apparel_How_To_Guide_SCS.pdf
- ↑ http://static.scs.georgetown.edu/upload/kb_file/Graduation_Apparel_How_To_Guide_SCS.pdf
- ↑ http://static.scs.georgetown.edu/upload/kb_file/Graduation_Apparel_How_To_Guide_SCS.pdf
- ↑ https://www.furman.edu/academics/commencement/academic-regalia/
- ↑ http://www.gradgowns.us/MHEC-Information-How_To_Wear_Academic_Regalia.html
- ↑ http://www.gradgowns.us/MHEC-Information-How_To_Wear_Academic_Regalia.html
- ↑ http://www.gradgowns.us/MHEC-Information-How_To_Wear_Academic_Regalia.html
- ↑ http://www.gradgowns.us/MHEC-Information-How_To_Wear_Academic_Regalia.html
- ↑ https://www.acenet.edu/Programs-Services/Pages/Academic-Regalia.aspx
About This Article
Article Summary
X
To put on an academic hood, unfold the garment and place it on a flat surface so that it's fully extended. Position the hood so that the velvet lining, which signifies your degree, is facing upward and out, and make sure the satin lining is visible at the front of the hood. Then, put the hood on over your head so that it's draped over your shoulders, with the pointed velvet hood resting at your neck. Use the buttons on the shoulders of your gown to fasten the hood in place, and adjust it as necessary so the colors are showing. Read on if you want to know the proper way to be hooded at an academic ceremony!
Did this summary help you?
Thanks to all authors for creating a page that has been read 271,859 times.
Reader Success Stories
- "Our graduating daughter's mother wanted the hood worn on the head. Thanks to the article another faux pas has been avoided at the commencement ceremony." ..." more
Advertisement
"Our graduating daughter's mother wanted the hood worn on the head. Thanks to the article another faux pas has been avoided at the commencement ceremony."
..."
more
