Download Article
Download Article
Typically, chrome is used to add a shiny or protective coating to other metals, and the metal underneath the chrome is usually the source of rust. Removing this rust with household objects is surprisingly easy with some elbow grease, but more serious follow-up maintenance may be required if the rust is widespread and much of the chrome has flaked off.
Steps
-
Use aluminum foil for an easy, low-cost method for removing rust from chrome. Aluminum reacts with rust chemically, resulting in a material that can be easily wiped or scrubbed off. [1] X Research source Since aluminum is softer than most metals, it will not scratch the surface of the chrome or the metal underneath it.
-
Clean the chrome . Before you attempt to remove the rust on the chrome, clean dirt and debris from the metal using soapy water, or with car wash soap if cleaning painted car parts. This helps you locate and access rusty areas more easily.
- For very dirty or very rusty surfaces, use vinegar or another mild acid suggested below, then follow up with foil.
Advertisement -
Dip aluminum foil into water. You can use any water, but saltwater is best, since the electrolytes and salts will help speed up the chemical process. Tear off strips of aluminum convenient to use on the rusted area. [2] X Research source
-
Rub the aluminum foil over the rust spots. Rub the aluminum foil back and forth over the rust spots. You do not need to use much pressure, although heavily rusted areas may require slightly more effort and a longer rubbing time.
- Dip the aluminum foil in water again whenever it gets dry.
- If you are working on a severely pitted surface then try wadding up the piece of aluminum foil. The edges that this creates will help to smooth down the metal and will actually fill in the pitted rust areas.
-
Stop every so often to remove the rust residue. Whenever the rust residue gets too thick, stop and wipe the residue using a rag or towel. This way you can see the remaining rust and continue rubbing it with the aluminum foil.
-
Rinse the surface of the chrome. Once you have removed all the rust, wipe the surface using a rag to reveal the shiny metal underneath.
-
Dry the chrome completely. Water spots show up very easily on chrome surfaces, and can cause further rust of the metal below. Use a paper towel or blow dryer to dry the surface. If necessary, consult the section on follow-up care to repair damage and prevent further rust.
- Be sure to apply a coat of polish or wax on your clean chrome to prevent more rust from forming.
Advertisement
-
Use cola, lime juice, or other mild household acids. Any cola or soda that includes phosphoric acid in the ingredients can be used to remove rust. [3] X Research source Other options include lime juice or vinegar. These mild acids can remove rust without significant risk to the surrounding metal.
- Diet cola does not have sugar in it, so the process will be less sticky. However, the sugar does help the acid to adhere to the rust.
- Avoid strong or concentrated acids, which can etch and weaken the underlying metal. If these household acids are ineffective, try again with phosphoric acid, but keep a fan on to blow corrosive fumes away from your face.
Learned the science behind household rust removal.
"Understanding how aluminum foil reacts with rust chemically explained why this odd trick works. The pointer on protective coatings also stuck with me to prevent future rust."
- Thomas D.
Saved my motorcycle's chrome.
"As a bike owner, I desperately needed a way to clean rust without damaging the chrome. The cola and aluminum method described restored my rusty tailpipes without scratching them. My bike looks great again, thanks to this guide!"
- Xavier W.
Mild acid tackled stubborn rust.
"Chrome polish easily removed light rust on my motorcycle, but some spots were too severe. Switching to the aluminum foil method dissolved even those stubborn areas beautifully without damage."
- Jhonatan B.
An odd trick restored beloved vintage chairs.
"I lucked into cool vintage leather and chrome chairs, but rust seemed to have wrecked them. Using simple household items, I cleaned and restored them beyond what I thought possible! Now, these chairs have their charm back."
- Adel G.
Elbow grease and vinegar worked magic.
"Following the vinegar and aluminum foil pointers revived the chrome legs on my antique table. I'm amazed at how well simple household items removed years of rust and grime! A little scrubbing and these 50-year-old legs shine again."
- Karen S.
We want to hear from you! Advice from our readers makes our articles better. If you have a story you’d like to share, tell us here
.
-
Clean the chrome. Before you attempt to remove the rust on the chrome it is best to make sure all the dirt and other debris are removed. This helps you to see and access the rust more easily for removal. Use car wash soap to clean painted surfaces on cars, and regular soapy water for other chrome objects.
-
Soak or cover the chrome with the acid. Ideally, soak the object for 15 minutes before removing. If you cannot soak the object, then simply pour the mild acid over the surface.
-
Wipe or scrub the rust off. You may need to use a rough sponge or gentle dish scrubber to remove the dissolved rust. Scrubbers designed for use on glass cookware tend to have the lowest risk of scratching your chrome. To remove heavy rust, rub gently with strips of aluminum foil or scrub with scouring pads.
-
Wash off residue with a safe soap. If you are cleaning a car, use car wash soap to remove the rust and acid residue. Dish soap should not be used on painted car surfaces, since it may strip the paint. Unpainted surfaces can be cleaned using any ordinary soap and water.
-
Dry and care for the car. Remove moisture with paper towels to minimize further rust. If the rust has caused noticeable damage, refer to the section on follow up care.
- Apply a coat of polish or wax on the chrome to prevent rust from forming in the future.
Advertisement
-
Use chrome polish for the quickest removal, or oil to save money. Chrome polish is the most expensive of the methods for removing rust, but a quality product will make removal quick and easy. A light penetrating oil such as WD40, CLR, or CRC can be used instead, and is typically the cheaper option. [4] X Research source
-
Clean the chrome using soapy water. Before you attempt to remove the rust on the chrome it is best to make sure all the dirt and other debris are removed. This helps you to see and access the rust more easily for removal.
- If the dirt is very difficult to remove you can also use vinegar to clean the surface of the chrome. Vinegar is a mild acid and will help in the process of rust removal as well.
-
Apply oil or chrome polish to the rusted area. Spread the cleaning substance over the rusted area on the chrome and make sure it is coated completely to avoid scratching the surface.
-
Apply oil or chrome polish to brass wool or fine steel wool. Soft brass wool or a brass wire brush is best for this purpose, since it is less likely to cause major scratches. If you cannot find brass wool, use the finest steel wool available, preferably grade #0000. Coating it with additional chrome polish will also help prevent scratching.
-
Rub the wool gently over the rusted area. Gently rub using a circular motion while making sure that the surface is moist at all times. Do not apply pressure while rubbing or else you will damage the surface.
- If the area gets dry then be sure to add more oil or chrome polish. Rubbing dry chrome with metal wool will scratch and damage the surface.
-
Rinse the area with clean water. Rinse off the metal polish and removed rust by washing the area with water.
-
Check for additional rust spots. If the surface of the chrome is not completely free of rust spots then use additional chrome polish to try to remove the spots using the same method.
-
Dry the chrome completely. Water spots show up very easily on chrome surfaces so it is best to dry the chrome completely to make it shiny and brilliant.
- Make sure to put a coat of polish or wax on the chrome to keep the rust from reforming.
- If extra care is needed, check out the followup section below.
Advertisement
-
Buff and dry the surface. If the rust only showed through the chrome in pinpricks, drying the surface with a towel after cleaning may be enough to keep up the chrome's appearance.
-
Protect the metal using polish or wax. Apply a wax or polish to the chrome to protect it from any further damage. Use a product only for its intended purpose, such as car wax for chrome-plated vehicles.
- Typically, wax is applied, buffed and left to dry, then a second layer is applied over it and buffed again.
-
Apply silver paint. This will keep a nice shine on the chrome, but the level of rust protection depends on the brand of paint and how well it is applied. Select a paint appropriate to the task, typically automotive paint , and apply as evenly as possible over areas pitted by rust damage. Use a fine, 1200 grit sandpaper to smooth it down after it dries, taking care to avoid sanding unpainted areas.
-
Get the object re-chromed. This is an expensive option, usually only performed on cars that were severely damaged by rust. Hire a mechanic who offers a chrome plating service if you want to re-chrome your car. If you're feeling ambitious, you can try to chrome plate objects at home, especially if they are relatively small.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Rust will reappear quickly if the surface becomes wet, so make sure you thoroughly dry the surface if exposed to water. Add a layer of chrome polish to the surface soon after it has dried. This will prevent new rust from forming.Thanks
- Typically, materials are chrome plated to protect them from rust. When rust develops, it is typically because the chrome has flaked away in spots, leaving the underlying iron or steel vulnerable to rust damage. In severe cases, the rust can spread to surrounding areas and cause bubbles underneath the chrome coating.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Sandblasting or grinding is not recommended, since they can easily damage the underlying metal.Thanks
- Some cars use plastic or paint that imitates chrome, not chrome itself. While these methods work on the rust itself, not the chrome, they may have unpredictable effects if your car is trimmed with an unidentified substance.Thanks
Advertisement
Things You'll Need
- Steel wool
- Light penetrating oil or chrome polish
- Cola, lime juice, or vinegar
- Aluminum foil
- Rag
References
About This Article
Article Summary
X
Before you try to remove rust, first clean your chrome. Then dip a piece of aluminum foil into water and rub it over the rust spots, since aluminum reacts chemically with rust. You can also try removing rust with cola, lime juice, or vinegar, which are all mild acids, by soaking the rust spots in one of these liquids for 15 minutes or pouring them over the rust spots if that's easier. When you’re done removing any rust, be sure to rinse the chrome completely and dry it thoroughly. For more suggestions from our reviewer, including how to use oil or chrome polish, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 915,142 times.
Reader Success Stories
- "Following the vinegar and aluminum foil pointers revived the chrome legs on my antique table. I'm amazed at how well simple household items removed years of rust and grime! A little scrubbing and these 50-year-old legs shine again. " ..." more
Advertisement
93%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Following the vinegar and aluminum foil pointers revived the chrome legs on my antique table. I'm amazed at how well simple household items removed years of rust and grime! A little scrubbing and these 50-year-old legs shine again.
"
..."
more
"As a bike owner, I desperately needed a way to clean rust without damaging the chrome. The cola and aluminum method described restored my rusty tailpipes without scratching them. My bike looks great again, thanks to this guide!
"
..."
more
"I lucked into cool vintage leather and chrome chairs, but rust seemed to have wrecked them. Using simple household items, I cleaned and restored them beyond what I thought possible! Now, these chairs have their charm back.
"
..."
more
"I am restoring an old bike with lots of rusty chrome, this article was a big help. I thought I would have to replace the rusty chrome wheels, I was surprised how easily they came clean. Thank you!"
..."
more
"Chrome polish easily removed light rust on my motorcycle, but some spots were too severe. Switching to the aluminum foil method dissolved even those stubborn areas beautifully without damage.
"
..."
more
