Download Article
Download Article
The belts in your car's engine drive such components as the air conditioning compressor, power steering pump, alternator and water pump. Older cars used separate V-belts for each component, while newer cars use a single serpentine belt to drive them all. Belts wear and tear over time, and a belt's failure could mean serious damage to the engine or its systems. You need to check your belts on a regular basis; here's what to look for.
Steps
-
Listen for squealing sounds from the engine when you drive. These sounds likely mean one or more belts are worn, loose or damaged.
-
Check belts for signs of wear. You need to do more than just visually inspect the belts. Pinch, squeeze and twist them, looking for cracks, fraying, splits or brittle places. [1] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source
- On a serpentine belt, also look for missing grooves or places where the belt's layers have separated.
Advertisement -
Check your belts for places where the rubber is slick or glazed in appearance. Slick spots can cause a belt to slip and may be precursors to overheating and cracking.
-
Inspect the pulleys. Look for a buildup of rubber deposits, as well as worn spots that could catch the belt and cause it to break. [2] X Research source
- Also check the belts' alignment on the pulleys. They should line up straight on the pulleys.
-
Check the belt tension. Check the tension on the longest length of the belt; there should be no more than one-half to one inch (1.25 centimeters to 2.5 centimeters) of give. [3] X Research source
Advertisement
Community Q&A
Search
-
QuestionI have a dead rat in my car and it stinks. What can I do to get the smell out?Community AnswerGet the rat out. Then wash your engine with petrol or a chemical called prepsol -- it's a cleaning product.
-
QuestionHow can I check the tension on a belt?Community AnswerTwist it if you do not have a tensioner test. The longer you can twist it, the belt is loose, the less it twists, the belt is good. You must have a good vision of comparing.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Be sure that any replacement belts are the same length and width as the belt they replace.Thanks
- According to the Car Care Council, V-belts should be replaced every four years or 36,000 miles (58,000 km), while serpentine belts are designed to last for up to 50,000 miles (80,000 km). However, it's a good idea to check your belts on a regular basis; ideally, once a month.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If the V-belt for your water pump breaks, your engine temperature will rise rapidly. If the V-belt for your alternator breaks, your alternator no longer will supply power to your battery to keep it charged, and the compressor for your air conditioner will also quit. If your car has a serpentine belt and it breaks, all these things will happen. If your car starts to overheat, pull over immediately.Thanks
- Many of the new composite belts will not show signs of wear until they break.Thanks
Advertisement
References
- ↑ https://www.consumerreports.org/car-repair-maintenance/how-to-inspect-car-belts-and-hoses/
- ↑ https://www.youtube.com/watch?v=axAltpW8wR4
- ↑ https://www.howacarworks.com/electrical-systems/checking-adjusting-and-refitting-drive-belts
- https://www.cartalk.com/content/features/Summer-Driving-Tips/cooling.html
About This Article
Thanks to all authors for creating a page that has been read 164,886 times.
Reader Success Stories
- "Mostly #5 (check the tension on the longest length of the belt) helped."
Advertisement