Download Article
Download Article
A properly gapped spark plug is necessary for a properly functioning engine. The gap size affects the spark plug's firing temperature, which has a direct relationship to the combustion of fuel and air in the engine. Opening the gaps provides a larger spark, useful for some customized engines in maximizing the efficiency. You can learn to properly gap spark plugs by measuring and adjusting accordingly.
Steps
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Learn your vehicle's gap specifications. Whether you're shopping for new plugs, you just bought new plugs that you want to check before installing , or you want to check the function of your current set of spark plugs, you need to learn the appropriate gap between the two electrodes on the end of each plug.- Each vehicle's measurement will be different, though most are generally somewhere between 0.028-.06 inch (0.15 cm). You can either look in your owner's manual or go to the auto parts store and have them look it up for you.
- Modified engines require smaller gap settings to account for the amount of power you're putting through the engine. General rule of thumb: the more power, the smaller the gap.
-
Select an appropriate gap tool. There are several varieties of tools used to measure the gaps of spark plugs, some of which are more appropriate for more modern plugs, which sometimes feature delicate precious metals. Most measuring tools will also feature a flat edge typically used for bending the bottom electrode on the spark plug to adjust the gap slightly. [1] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source- A coin-style gap measure is usually the cheapest option, and works by running the edge of the "coin" through the gap until you reach a point where it stops. The edge is marked like a ruler, designating the thickness of the edge at that point. This is a good tool for older plugs you want to check the efficacy of, but can also inadvertently widen the gaps as you use it.
- A wire coin gap works essentially the same way as the regular coin-style gap, but features different wire measures of varying lengths on the edge around the coin.
- A blade-style feeler gauge is an effective and versatile tool. Built like a pocket-knife, this gauge features different blades of varying widths, some with wire on the end and some without, placed in the gap to check the spacing of the electrodes. You can also use multiple blades to measure larger gaps. These are effective to use while adjusting.
Advertisement -
Clean the spark plug . If you've just pulled it out of the box, it should be in pretty good shape, but if you're checking a plug that you've been using in your car it's a good idea to clean it off a little with a clean cloth. Spark plugs can build up some whitish soot on the contact points, so you'll want to make sure they're somewhat clean to get the most accurate reading. [2] X Research source- You can use a little bit of quick-drying (90%) alcohol on the contact points to clean them off if they're especially dirty. [3] X Research source Lots of build-up or any blackening on the contact points might be a sign of a plug that's outlasted its prime, however. If they're especially dirty, you might consider buying new ones.
- There's a special tool designed for cleaning spark plug—think of it as a sand-filled pouch that's attached to an air compressor. It cleans the electrode of the spark plug by sandblasting it.
-
Measure the gap by passing the tool through the electrodes. Place the appropriate blade or wire on your gap tool between the electrode tips of the plug, or pass the coin through the electrodes to determine the measurement.
Advertisement
-
Determine if the gap needs adjusting. If the tool passes through the gap without touching the electrodes at the appropriate measure, your gap is too wide. If you can't fit it between the electrodes, the gap is too small and needs to be widened some. If it fits closely to the specified measurement, you're safe to install the spark plug. [4] X Research source- Most spark plugs and iridium plugs manufactured today don't need to be gapped prior to installing them. If you've got a custom modified engine, though, you might be interested in checking or installing plugs at a different spacing. Adjust them accordingly. [5] X Research source
-
Use the tool to adjust the bottom electrode. When you hold the spark plug with the electrodes facing the floor, you'll want to bend the bottom one very gently either in toward the other electrode if you want to narrow the gap, or out, if you want to increase the gap slightly. [6] X Research source- Never bend more than a few (.02) fractions of an inch. It won't take much pressure, so be very careful. Spark plugs can be quite delicate, and any fracturing can cause misfires.
- If you're having trouble using the tool to adjust the gap, consider bending it in using a flat surface like a table to apply some very gentle pressure on the electrode to adjust it.
-
Re-measure the gap and adjust accordingly. Be very careful not to contact the electrode in the center of the plug and damage the core. If it breaks or shorts you'll need to toss it and buy a new one. -
Be very gentle. Snapping off the electrode will waste your efforts, and it doesn't take much to do so. Use only a small amount of pressure to bend the electrode and only bend it a little bit.
Advertisement
Community Q&A
Search
-
QuestionThe gap for my car is .054. This is more than double the thickness of the thickest blade on a feeler gauge. Am I supposed to remove several blades from the feeler-gauge assembly and stack them?Community AnswerYes. Add more to get the right thickness, if your thickest leaf is too small. It's a very accurate way to measure or set a gap.
-
QuestionHow would I know if my plug is pre-gapped?Community AnswerIt says on the inside flap of the box whether or not they're pre-gapped.
-
QuestionHow do I find the gap on an NKG spark plug?Community AnswerNGK offers an extensive pocket book, which is often given away for free at exhibitions and motor fair. You can usually find this sort of information on NKG's website as well. The correct gap depends on the motor type and may vary from the gap when buying it new.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Do not over-tighten the spark plugs. [7] X Research source Most heads are made of aluminum and the threads can strip easily.Thanks
- If the color of the tips are different from one another, your engine may have a problem.Thanks
- Try to match the gaps between all plugs as evenly as possible.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be sure to re-install the plug wires in the same order as they were before.Thanks
Advertisement
Things You'll Need
- Feeler gauge
- 13/16" socket with drive
- Vice
- Rag
References
- ↑ https://pubmed.ncbi.nlm.nih.gov/36844584/
- ↑ https://fctemis.org/notes/9933_SERVICING%20OF%20SPARK%20PLUG.pdf
- ↑ https://www.youtube.com/watch?v=c-o_3RNOYzc
- ↑ https://www.researchgate.net/publication/348060415_Platinum_Spark_Plug_Gap_Adjustment_to_Fuel_Consumption_and_CO_Emission_at_110cc_Engine
- ↑ https://osme.co.in/wp-content/uploads/2020/04/Spark-Plug.pdf
- ↑ https://www.youtube.com/watch?v=IuW3svdqKZM
- ↑ https://www.youtube.com/watch?v=Ef1ElCVN64k
About This Article
Article Summary
X
A spark plug gap is the distance between the end of the electrode and the base of the spark plug. If your spark plugs aren’t properly gapped, your engine may not burn fuel properly. Since every make and model requires a different gap size, start by looking in the owner’s manual for your vehicle to find the required gap size, or pull the information up online. Then, grab a gauge tool, and slide the recessed lip under the electrode sticking out from the base of the spark plug. Rotate the disc until you feel a firm resistance and check the measurement next to the lip. If the gap matches your required size, you’re good to install it in your vehicle. If the gap is too small, pull the body of the plug away from the disc with the electrode hanging on the lip to gently force the gap open and re-measure it. If the gap is too big, use the broad side of the gap tool to push the electrode down and make the gap smaller. Continue re-measuring and making minor adjustments until the gap in the spark plug matches your manufacturer’s recommended gap size. For tips on choosing an appropriate gap tool, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 585,751 times.
Reader Success Stories
- "Never knew about gapping a spark plug til someone mentioned I should do it before replacing the one in my lawn mower (yeah, 65yr old woman). I've had the coin gauge floating around my junk drawers for years, wondering what the heck it was. Your DIY video is excellent! Thanks so much." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Never knew about gapping a spark plug til someone mentioned I should do it before replacing the one in my lawn mower (yeah, 65yr old woman). I've had the coin gauge floating around my junk drawers for years, wondering what the heck it was. Your DIY video is excellent! Thanks so much."
..."
more
"I've never done this (replace a spark plug in a lawnmower), and found your website very helpful and easy to navigate. I gapped the plug right I guess, because the mower started right up."
..."
more
"I don't like adjusting the gap on spark plugs, but I have an old 1965 Ford, so I have always had to. This article just reminded me that I'm doing it right."
..."
more
"This method has really helped so much by learning different tactics. And it's working for sure, thanks guys for your help."
..."
more
"When you need to adjust the gap on platinum plugs, use the wire gapping tool, do not touch the electrode!"
