PDF download Download Article PDF download Download Article

Cleaning a fish is quite simple and can make eating a fish you caught yourself all the more satisfying. For this article we’ve put together answers to some of the most frequently asked questions about cleaning a fresh fish. Follow these tips and you’ll be cooking up a delicious meal in no time!

Question 1 of 5:

Should you gut a fish right away?

PDF download Download Article
  1. Clean and gut fish as soon as possible after catching them. If you don’t want to gut a fish right after catching it because you want to keep fishing, the best thing to do is keep it alive by putting it into a bucket of water until you’re ready to clean and gut it. Alternatively, you can bleed the fish and store it on ice in a cooler for 24-48 hours before gutting it. [1]
    • If you don’t keep a fish alive in water or put it on ice, it can spoil in 2 hours or less, depending on how warm it is outside.
    • You can also use a fish stringer or a fishing net cage to keep fish alive in the water while you continue fishing.
    • If you happen to be ice fishing, you can bleed the fish you catch and just store them right on top of the ice until you’re ready to gut them!
  2. Advertisement
Question 2 of 5:

Why do you have to gut a fish?

PDF download Download Article
Question 3 of 5:

How do you gut fish before cooking?

PDF download Download Article
  1. The small hole on the belly of the fish, back near the tail, is the anus. Using a sharp fillet knife, make a shallow cut from here along the belly of the fish, stopping at the base of the gills. [3]
    • Don't jam the knife all the way inside the fish or you can cut the intestines open. You want a shallow cut so that you can pull them out intact, preventing messy (and unappetizing) spillage. [4]
    • The process for gutting a fish is the same for any size or type of fish.
    • If you want to gut fish in the wild, bring a sharp fillet knife with you and a bucket to work over and dump the guts into. If you’re gutting fish at home, work on a clean work surface, such as a cutting board.
  2. Get in there and get everything out. These gummy, long guts should come out without much of a fight. Make sure to check inside to get out anything you missed, like a large, dark kidney that some fish have in the back or some strands of innards along the walls. [5]
    • Don’t leave anything inside the fish. Pull out everything from inside until you only see flesh.
    • It’s up to you whether or not to cut off the head. If you want to cook the fish whole, leave the head on. If you want to fillet the fish, chop it off right below the gills.
    • If you want to remove the dorsal fin, simply grip the fin tightly near the tail and pull quickly in the direction of the head to rip it out cleanly.
  3. Spread open the cavity and hold it under a stream of cool, running water. Rinse it out thoroughly to remove any remaining residue from the guts. [6]
    • Rinsing the inside of the fish very well gets rid of strong, oily flavors that the entrails can leave behind.
    • Be really careful when handling the fish because some fish have particularly sharp fins and/or teeth that could cut your hands.
    • If you’re cleaning a fish out in the wild, you can rinse it out in a clean creek or river.
    • Wash your hands thoroughly with soap and water after you’re done cleaning and handling the fish.
  4. Advertisement
Question 4 of 5:

What do you do with fish guts after cleaning?

PDF download Download Article
  1. If you’re gutting a fish out in the wild and not at home, pack the guts out with you in a tightly closed plastic bag or a sealable container of some type. Toss the guts into your trash can at home.
    • In small quantities, it’s sometimes okay to toss fish guts back into deep or running water so other fish can feed on them. However, this is illegal in some areas, so make sure to look up local regulations on your local fish and wildlife service’s website.
    • To prevent your trash from smelling like rotten fish, seal the fish guts in a zip-top plastic bag and put them in your freezer until it’s trash day.
Question 5 of 5:

What is the easiest way to remove fish scales?

PDF download Download Article
  1. Hold the fish firmly by the tail with your non-dominant hand. Starting at the tail, scrape the back of the knife along the whole length of the fish until you reach the head. Repeat this until all the scales flake off, then do it again on the other side of the fish. Wash the fish thoroughly when you’re done removing the scales. [7]
    • You can also scrape scales off with a spoon or another dull utensil that won’t cut into the fish.
    • It can help to scale under running water, or simply underwater in the sink, to prevent a mess.
    • Don't worry if you miss a few scales—they aren't tasty, but they won't hurt anyone.
  2. If you’re cleaning something like a bullhead, a catfish, or another thick-skinned bottom feeder, Skin it. To do so, cut a 1 in (2.5 cm) notch right where the top of the fish's head meets its body. Then, gripping the fish from the head, peel the skin back to the tail. Rinse the flesh thoroughly when you’re done. [8]
    • These types of fish, in particular, have a thick, unappealing skin that most people remove before cooking.
    • You can use a pair of catfish pliers to peel the skin off more easily.
  3. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I cut a fish into fish steaks?
    Michael Reynolds
    Professional Fishing Instructor
    Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW).
    Professional Fishing Instructor
    Expert Answer
    Clean it following the steps above, then cut off the head. Starting from that cut, measure back 1 inch and cut through the whole fish. One-inch thick is the recommended portion width—after pan-frying for seven minutes on each side over medium/high heat in a nicely oiled pan, it will be cooked to perfection!
  • Question
    What kind of knife should I use?
    Michael Reynolds
    Professional Fishing Instructor
    Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW).
    Professional Fishing Instructor
    Expert Answer
    Make sure you're using a really sharp knife! I always carry a sharpening stone with me too.
  • Question
    How long can fish stay on ice before cleaning?
    Kody Lee
    Guide, Fishing Trips
    Kody Lee is a Guide for Fishing Trips in Washington. He has worked as a guide since 2015 and has fished his entire life.
    Guide, Fishing Trips
    Expert Answer
    This depends on many variables so there is no one answer. At the very least, try to clean them the day you caught them.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To clean a fish, lay down some newspaper to protect your work surface and use a dull knife or spoon to scrape off the scales, working from the tail to the head. Next, cut a shallow incision from the anus, which is the small hole on the belly of the fish, up to the head, stopping at the base of the gills. Then, scoop out the fish's innards with your fingers or a spoon, cut the head off, and remove the dorsal fin by pulling on it firmly. Finally, rinse the fish off, inside and out, with cool water. For tips on filleting a fish, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 289,461 times.

      Reader Success Stories

      • Ibrahim B.

        Feb 2, 2018

        "I can now teach people."
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement