How to Configure a TP Link Router

PDF download Download Article
PDF download Download Article

A router is a device that connects multiple devices, such as computers and smartphones to a network. If you recently bought a new TP-Link router, you can easily configure it using the Quick Setup process using the user interface, which you can access using a web browser on your PC. If you don't have all the information you need, you can try and get your wireless network up and running using a basic setup. You can also use the web-based interface to set up parental controls on your router as well as assign port forwarding to a specific device. This wikiHow article teaches you how to configure a TP-Link router.

TP Link Setup

If you've got a new TP-Link router, you can easily set it up from any electronic device that has a web browser. Simply navigate to http://tplinkwifi.net/ and follow the prompts to create your administrator account and network.

Method 1
Method 1 of 5:

Setting Up The Router

PDF download Download Article
  1. Power off the modem . If you have a separate modem, be sure to unplug the modem to power it off. If the modem has a battery backup, be sure to remove that too.
  2. You will need an ethernet cable to do so. Use one of the following steps to connect the router to the internet.
    • If the router has a built-in modem, simply connect the internet cable from your internet service provider to the "WAN" or "Internet" port on the back of the router.
    • If you have a separate modem, connect the internet cable in your home to the "WAN" or "Internet" port on your modem. Then connect an ethernet cable to an available "LAN" port on the back of the modem. Then connect the other end of the ethernet cable to the "WAN" or "Internet" port on the back of the router.
    Advertisement
  3. If you have a separate modem, go ahead and plug it back in and reinsert the battery pack to power the modem back on.
  4. Make sure you use the AC adapter that came with the router. Connect the AC adapter to the power input, which is typically located on the rear of the router. Then plug the AC adapter into an electrical outlet. The router should power on. Wait for the lights on the front of the router to turn solid to indicate that the router is finished booting up.
  5. You'll need another ethernet cable to do so. Connect an ethernet cable to any available "LAN" port on the router. Then connect the other end to an available ethernet port on your computer.
    • If your computer does not have an available ethernet port, you can purchase a USB-to-ethernet adapter and use that to connect the ethernet cable to your computer using any available USB port.
    • Alternatively, you can connect to your router wirelessly using the default SSID and password that is listed on the bottom of the router or in the user's manual.
    6. Advertisement
Method 2
Method 2 of 5:

Configuring the Router Using Quick Setup

PDF download Download Article
  1. You can use any web browser on your computer, including Google Chrome, Safari, Firefox, or Microsoft Edge .
  2. 2
    Enter the default access address in the address bar at the top of your web browser. This opens the router's user interface. You can usually find the default access address listed on the bottom of the router or in the user's manual. The default access address is typically one of the following: [Image:Configure a TP Link Router Step 7.jpg|center]]
    • http://tplinkwifi.net
    • http://192.168.0.1
    • http://192.168.1.1
    • http://10.0.0.1
  3. Create a new admin password and click Let's Get Started . This is not the Wi-Fi password, this is the password you will use to log in to the router and change the settings if the need should arise. A good, strong password should be at least 8 characters long and contain a mix of letters, numbers, and special characters. Be sure to create a password that you can remember . Enter the password twice and then click Let's Get Started to proceed.
  4. This option walks you through the process of setting up your router. Click the Quick Setup tab at the top, if it is not already selected.
    • If you are using an older TP-Link model, click Quick Setup at the top of the menu panel to the left.
  5. Use the drop-down menu next to "Time Zone" to select your current time zone. Then click Next to continue.
  6. Select your internet connection type. Click the radio option next to your internet connection type. You can select "Dynamic IP," "Static IP," "PPPoE," "L2TP," "PPTP." If you are not sure what your connection type is, click Auto Detect at the top of the screen. Click Next when you are ready to continue.
    • The "Auto Detect" feature may not work perfectly. Check with your internet service provider if you are not sure what type of internet connection you are using.
    • If you are not able to get the information you need from your internet service provider, you can try and get your internet up and running using a basic setup .
  7. Depending on what type of internet connection type you selected, you may need to enter your IP address, Subnet mask (which is usually "255.255.255.0"), your default gateway, and your primary and secondary DNS. If you are not sure what this information is, check with your internet service provider. Enter the information and click Next .
    • If you are asked if you want to clone your computer's MAC address, check with your internet service provider to see if your internet access is limited to a specific MAC address. If so, make sure you are using the computer that has that MAC address and click the radio option to clone your computer's MAC address. If you are not sure, click the radio option next to "Do NOT Clone my Computer's MAC Address and click Next .
  8. The network name is the name people will search for when they try to connect to your wireless network. The password is what they will need to enter in order to connect to your network. Enter the network name next to "Network Name (SSID)" and enter the password next to "Password." Then click Next to continue.
    • If you plan on allowing guests to connect to your network, be sure to use a password that is not used for any other apps or services. Use a password that you don't mind other people knowing.
    • If you have a dual-band router, you will need to come up with a separate network name (SSID) for both the 2.4 GHz band and the 5 GHz band. The 2.4 GHz band has slower internet, but a larger range. The 5 GHz band has faster internet, but a shorter range. You can use the same password for both, but the network name needs to be unique for both.
    • If you don't want your network name to appear on people's devices when they search for a wireless network, click the checkbox next to "Hide SSID." You will need to enter the network name and password manually when connecting to the wireless network.
    • If your router supports Smart Connect, you can click the checkbox to enable Smart Connect. This allows devices to automatically switch from the 2.4 GHz band and the 5 GHz band automatically depending on how far away they are from the router. [1]
  9. The summary page displays all the information you have entered so far. Review the page and make sure the information is correct. Click Save when you are ready to continue.
  10. The next page displays your network names and passwords. Use this time to connect your wireless devices to the network. Click Next when you are ready to continue.
  11. If you have a TP-Link ID, enter the email and password associated with your TP-Link ID and click Log In to connect to cloud services and register your router. If you do not have a TP-Link ID, you can click Register Now , enter an email address, create a password, and agree to the terms and conditions to create a TP-Link ID. You can also click Log In Later to skip this step.
  12. Congratulations! You have just set up your TP-Link router. [2]
  13. Once you finish setting up your router, it's a good idea to update your router's firmware. It may take a few minutes for the router to update. Once the update is finished, the router will reboot automatically. Use the following steps to update the router's firmware:
    • Enter the default access address in a web browser.
    • Log in using the admin password.
    • Click Update in the upper-right corner.
    • Click Upgrade below "Online Upgrade" if an update is available.
    • Click Yes to confirm.
    • Wait for the update to finish.
    14. Advertisement
Method 3
Method 3 of 5:

Configuring the Router Using Basic Setup

PDF download Download Article
  1. You can use any web browser on your computer, including Google Chrome, Safari, Firefox, or Microsoft Edge.
  2. This opens the router's user interface. You can usually find the default access address listed on the bottom of the router or in the user's manual. The default access address is typically one of the following:
    • http://tplinkwifi.net
    • http://192.168.0.1
    • http://192.168.1.1
    • http://10.0.0.1
  3. This is not the Wi-Fi password, this is the password you will use to log in to the router and change the settings if the need should arise. A good, strong password should be at least 8 characters long and contain a mix of letters, numbers, and special characters. Be sure to create a password that you can remember . Enter the password twice and then click Let's Get Started to proceed.
  4. It's the second tab at the top of the screen. This allows you to configure your router using basic steps and with minimal information needed.
  5. It's the third option in the menu panel on the left. This allows you to configure your wireless settings.
  6. Most dual-band wireless routers have two networks you can enable and connect to. The 2.4 GHz band has slower internet but a larger range. The 5 GHz band has faster internet, but a shorter range. Click the checkbox next to the networks you want to enable. You can enable both networks at the same time.
  7. The network name is the name people will search for when they try to connect to your wireless network . The password is what they will need to enter in order to connect to your network. You will need to enter a unique network name for both the 2.4 GHz network and the 5 GHz network. However, you can use the same password for both of them.
    • If you plan on allowing guests to connect to your network, be sure to use a password that is not used for any other apps or services. Use a password that you don't mind other people knowing.
    • If you are using an older TP-LInk model, you will need to click Wireless 2.4 GHz and Wireless 5 GHz in the menu to the left to configure both network bands.
    • If you don't want your network name to appear on people's devices when they search for a wireless network, click the checkbox next to "Hide SSID." You will need to enter the network name and password manually when connecting to the wireless network.
  8. It's the blue button in the lower-right corner. This saves your network settings.
  9. When you change the name and password of your wireless network, your computer and devices will be automatically logged out. Log back into the network using the network name (SSID) and password you set in the router settings. You should now be able to connect to the internet.
  10. Once you finish setting up your router, it's a good idea to update your router's firmware. It may take a few minutes for the router to update. Once the update is finished, the router will reboot automatically. Use the following steps to update the router's firmware:
    • Enter the default access address in a web browser.
    • Log in using the admin password.
    • Click Update in the upper-right corner.
    • Click Upgrade below "Online Upgrade" if an update is available.
    • Click Yes to confirm.
    • Wait for the update to finish.
    11. Advertisement
Method 4
Method 4 of 5:

Setting Up Parental Controls

PDF download Download Article
  1. You can use any web browser on your computer, including Google Chrome, Safari, Firefox, or Microsoft Edge. You can use the web-based interface to configure parental controls for your TP-Link router. You can use parental controls to block websites or keywords on specific devices as well as set time limits on specific devices.
  2. This opens the router's user interface. You can usually find the default access address listed on the bottom of the router or in the user's manual. The default access address is typically one of the following:
    • http://tplinkwifi.net
    • http://192.168.0.1
    • http://192.168.1.1
    • http://10.0.0.1
  3. This is the password you set when you first opened the user interface during the initial router setup. Enter the administrative password and click Log In .
    • If you have not yet set an administrative password, enter a new password and click Let's Get Started . Then click Quick Setup and complete the initial setup process.
  4. It's the second tab at the top of the page. This allows you to configure your router using basic steps and with minimal information needed.
  5. It's the fifth option in the menu on the left side. It has an icon that resembles a large person and a small child.
  6. It's next to an icon that resembles a plus (+) sign in the upper-right corner of the web page.
  7. Enter the name for the parental control profile next to "Name."
  8. Use the following steps to do so:
    • Click the large plus (+) icon below "Devices."
    • Click the checkbox next to the device(s) you want to apply the settings to.
    • Click Save in the lower-right corner.
  9. If the devices listed below "Devices" are correct, click Next in the lower-right corner to continue.
  10. You can enter a keyword to block content from any website that contains that keyword, or you can enter the name of a specific website or app.
    • You can add as many keywords or websites you want to block.
  11. When you have entered all the keywords you want to block, click Next to continue.
  12. To do so, click the checkbox next to Enable below "Time Limits." Then use the slider bar to set a daily time limit for how long the device can be online each day. You can set a separate daily time limit for weekdays (Mon to Fri) and weekends (Sat & Sun).
  13. This blocks internet access on the device during bedtime hours. To set a bedtime limit, click the checkbox next to Enable below "Bedtime." Then use the boxes next to "From:" and "To:" to set a time period in which the device is blocked from accessing the internet (i.e. "From: 9:00 PM, To: 6:00 AM"). You can set a separate bedtime for weekdays and weekends.
  14. This saves the profile. You can add more profiles to create different restrictions. [3]
    15. Advertisement
Method 5
Method 5 of 5:

Configuring Port Forwarding

PDF download Download Article
  1. You can use any web browser on your computer, including Google Chrome, Safari, Firefox, or Microsoft Edge. If a computer or device requires access to a specific port or external web address, you can set up port forwarding on your router to allow the device to directly connect to the external internet. You can set up port forwarding in the web-based interface.
  2. This opens the router's user interface. You can usually find the default access address listed on the bottom of the router or in the user's manual. The default access address is typically one of the following:
    • http://tplinkwifi.net
    • http://192.168.0.1
    • http://192.168.1.1
    • http://10.0.0.1
  3. This is the password you set when you first opened the user interface during the initial router setup. Enter the administrative password and click Log In .
    • If you have not yet set an administrative password, enter a new password and click Let's Get Started . Then click Quick Setup and complete the initial setup process.
  4. It's the third tab at the top of the screen. This is where you can make advanced configurations on your TP-Link router.
  5. Your public IP address is listed next to "IP Address" in the box labeled "Internet." Your private IP address is listed next to IP Address" in the box labeled "WAN." Write down both numbers.
  6. To do so, click Network in the menu panel to the left to expand the Network menu. Then click DHCP Server in the menu below "Network".
  7. To do so, scroll down to the "DHCP Client List" table. This lists all devices connected to your network. Identify the device you want to apply port forwarding to by the device name. Then write down the assigned IP address and MAC address.
  8. It's next to an icon that resembles a plus (+) sign in the upper-right corner of the web page. This allows you to enter an address reservation for the device.
  9. Enter or copy and paste the MAC address next to MAC Address . Then enter the IP address next to IP Address . Enter a description, if you want. Then click Save . This ensures the router will always assign that IP address to that device.
  10. To do so, scroll down and click NAT Forwarding in the menu panel to the left. Then click Virtual Servers .
  11. It's next to an icon that resembles a plus (+) sign in the upper-right corner of the web page.
  12. Services include HTTP, FTP, DNS, Gopher, NNTP, etc. To select a service type click View Existing Services next to "Service Type". Then click Choose next to the service type you want to select. The port number for that service type will be auto-filled.
    • If the service you are connecting to uses a different port number than what is auto-filled, you will need to check with that service to find out the correct port number.
  13. Enter the same IP address you previously assigned the device next to "Internal IP address." Click Save in the lower-right corner when you are finished. This assigns port forwarding to the device.
    • To visit the server you just added in a web browser on your network or outside your network by entering the public IP address in the address bar, followed by a colon (:) followed by the port number (i.e 119.139.172.01:80). [4]
    14. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How do I reset the router if I forget the password or I can't log in?
    Steven Racz
    Audio, Video, & Automation Expert
    Steven Racz is an Audio, Video, & Automation Expert and Owner at Altitude Audio Video based in Littleton, Colorado. With over 15 years of professional experience, Steven and his team of technicians specialize in installing residential and commercial audio systems, theater design and installation, Josh Ai voice & control systems, and Control4 automation. At Altitude Audio Video, they strive to tailor the perfect system for your needs.
    Steven Racz
    Audio, Video, & Automation Expert
    Expert Answer
    You can reset the router by locating the reset hole on your router. It is usually located at the back of your router, but it varies by model. When located, you can insert a very small pin or needle-like object like a SIM tool or a paper clip. Press inward for 30 seconds, and you're good to go.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      6 Easy Ways to Use Shortcut Keys to Shut Down a Windows PC
      How to
      Check Your Mouse DPI on Windows & Mac
      5 Quick Ways to Change Your Desktop Wallpaper on Windows
      How to
      Bring an Off Screen Window Back on Windows
      6 Simple Ways to Create a .ZIP File from Files or Folders
      How to
      Copy and Paste on Any Device
      4 Easy Ways to Paste Text Using Keyboard Shortcuts
      How to
      Automatically Shut Down Your Computer at a Specified Time
      How to
      Change a File Extension
      3 Easy Ways to Merge Objects in Blender: Step-by-Step
      3 Easy Ways to Customize EXE Program Icons in Windows
      How to
      Copy and Paste a Link
      How To Refresh a Webpage: Desktop & Mobile
      How to
      Select All
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about dealing with routers, check out our in-depth interview with Steven Racz .

      References

      1. ↑ https://www.youtube.com/watch?v=Adg51u68wUk
      2. ↑ https://www.youtube.com/watch?v=v3CbgbQpzkA
      3. ↑ https://www.youtube.com/watch?v=lHwtkMDYEio
      4. ↑ https://www.youtube.com/watch?v=2tIUts0fyFk

      About This Article

      Article Summary X

      1. Connect the router to the internet and plug it in.
      2. Connect a PC to the router using the default SSID or a wired connection.
      3. Go to http://tplinkwifi.net/ in a web browser.
      4. Set a new admin password and click Let's Get Started .
      5. Select your time zone and click Next .
      6. Select your internet connection type and click Next .
      7. Enter your IP and/or MAC information and click Next .
      8. Enter a network name (SSID) and password for your networks.
      9. Review you information and click Save .
      10. Connect your devices to your network.
      11. Log in with your TP-Link ID.
      12. Click Update in the upper-right corner and update your firmware.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 116,644 times.

      Is this article up to date?

      Advertisement