Download Article
Download Article
Mead is one of the oldest alcoholic drinks known to man. It is essentially a wine made from fermented honey and is relatively easy to produce. The three main ingredients are water, honey, and yeast, and with the proper equipment, you can make your own mead at home. The original recipe calls for Filipendula (mead herb), to be added, otherwise it's called honeywine. Recipe for that as follows.
Ingredients
- 1 gallon (3.8 L) of chlorine-free water
- 3 pounds (1.4 kg) of honey
- 1 gram of white wine yeast
- 1 pound (0.45 kg) of fresh fruit (optional)
- 1 cup (~25 g) of fresh herbs (optional)
- 2 tbsp (~3 g) of dried herbs (optional)
- 2 tbsp (~14 g) of spices (optional)
Yields 1 gallon (3.8 L) of mead
Steps
-
Get a basic brewing kit. You will need some basic equipment in order to properly make your mead. [1] X Research source You can find basic home brewing kits from brewing supply stores, and online. The kit should contain:- A bucket or carboy to hold the fermenting mead. The container should also have an airlock on it to allow the gasses that are released during fermentation to escape the container while keeping it sealed from contamination.
- A hydrometer to allow you to calculate the alcohol by volume (ABV) level and see if the batch is still fermenting.
- A siphon to allow you to transfer the liquid without disturbing the sediment that builds up.
- Bottling equipment like a capper and glass bottles or a corker and wine bottles so you can bottle your finished mead.
-
Use clover honey for a traditional mead. Different types of honey can add different flavor profiles to your mead, so choose one that you enjoy. [2] X Research source Clover honey is the basic honey you’ll find in the grocery store. It has the classic sweet honey taste, and is a great honey for mead making. You can choose different types of honey to alter the aromatics and the taste of your mead.- Orange blossom honey will add flavor notes of oranges.
- Buckwheat honey has a strong flavor, similar to molasses.
- Wildflower honey can be a random mix of local floral sources, and the flavors can be impossible to predict.
- For a simple 1 gallon (3.8 L) batch of mead, you’ll need at least 3 pounds (1.4 kg) of honey, so make sure you get enough!
Advertisement -
Add fruit, herbs, and spices to alter the flavor of your mead. You can also manipulate and alter the flavor profile of your mead using fresh fruits and spices. Spices like nutmeg and clove, fruits like blueberries or cherries, and herbs like lemongrass and basil can dramatically change the flavor notes in your mead, and give it a unique character. Just be sure not to overpower the natural sweetness of the mead. [3] X Research source- Ginger, vanilla, citrus peels, coriander, cinnamon, nutmeg, even chocolate can be added to mead to change the characteristics of its taste and aromatics.
- Use fresh fruit instead of dried or dehydrated fruit as they can affect the fermentation process.
-
Use white wine yeast to ferment the mead. Yeast is one of the three main ingredients for making mead, so it’s important to choose the right one for your mead. [4] X Research source White wine yeast ferments at a fast pace, and accents the honey characteristics of the mead. You can find white wine yeast and other yeasts at brewing supply stores and online.- You can use other types of yeasts, but they will each have different results and flavor profiles. For example, champagne yeast will create a higher ABV, while red wine yeast is great for mead with lots of fresh fruit because it metabolizes fresh sugars better.
- You can also use standard bread yeast as an easy alternative that will give you a smooth mead without altering the character of the honey flavor.
-
Boil all of your brewing equipment in a large pot of water. All of the equipment and utensils that you will use to make your mead must be completely sanitized. An easy way to do this is to boil all of the equipment you will be using for 5 minutes, or use a special sanitizer that comes with many homebrewing kits. Any bacteria or contamination that gets in can ruin an entire batch of mead. [5] X Research source- Sanitize any spoons, tubing, bottles, containers, or other utensils that you may use.
- Be sure to rinse your equipment of any cleaning solutions that you use, as this can introduce unwanted chemicals and ruin the taste of your mead.
Advertisement
-
Mix 1 US gal (3.8 L) of water and 3 lb (1.4 kg) of honey in your bucket or carboy. The first stage of making mead is a mixture called a “must.” Bring the water to a boil in a large pot and add it to the container you will ferment your mead in, then stir in honey. Do not add the honey to the boiling pot of water or it will alter the flavor of the honey, and the honey may stick to the bottom of the pot. [6] X Research source- Make sure the honey has fully combined with the water before moving on.
-
Add your fruit, spices, and herbs to the container of must. Once the honey has fully combined with the water, you can add your fruit and spices to the must. Place your fresh fruit into the mixture without smashing or muddling the fruit to avoid changing the color of the mead. Add your tea bag full of spices and herbs into the liquid and give it a nice stir. [7] X Research source- For fresh fruit, add 1 pound (0.45 kg) per 1 gallon (3.8 L) of water.
- For spices like nutmeg and cinnamon, add 2 tbsp (~14 g) per 1 gallon (3.8 L) of water.
- For fresh herbs, add 1 cup (~25 g) per 1 gallon (3.8 L) of water. For dried herbs, add 2 tbsp (~3 g) per 1 gallon (3.8 L) of water.
-
Use a hydrometer to check the specific gravity of the must. After you’ve combined the ingredients to form the must, you can use a hydrometer to check the specific gravity of the mixture. This will allow you to determine the potential alcohol content of your mead. It’s important to check the gravity of the must before you add your yeast because it will be difficult to alter the mixture once the yeast begins working to ferment the must. [8] X Research source- The baseline reading of your must should be somewhere between 1.060 and 1.120 on the hydrometer.
-
Add the yeast to the must. Once you’ve got the must flavor profile and ABV that you want, it’s time to add the yeast. A standard packet of brewing yeast is enough for up to 5 gallons (19 L) of mead, so use 1 gram (or one-fifth of the packet) if you're only making 1 gallon (3.8 L) of mead. Simply stir the yeast into the must and mix it in thoroughly. [9] X Research source- Adding too much yeast will only make the fermentation process go a little faster and will not damage or alter the taste of your mead.
-
Seal the container of must and attach an airlock with a rubber stopper. When the enzymes in the yeast begin to break down the sugars in the honey, it will release gasses that can build up in the container and potentially explode. Use a rubber stopper that fits over the opening in the container, then place the stem of the airlock into the hole of the rubber stopper, and place them both into the opening of the container. It’s important that you have an airlock so you can release the gasses while keeping the mead free from any contamination. [10] X Research source- Whether you’re using a plastic container or a glass carboy, it needs to be sealed so the fermentation process can begin, and an airlock is needed to allow the gasses to escape.
Advertisement
-
Stir the container twice a day for the first 48 hours to begin fermentation. To get the fermentation process started, you’ll need to mix the ingredients twice a day for the initial 48 hours, but not past that period. [11] X Research source Make sure any utensils you use to stir the mixture are fully sanitized so you don’t introduce any bacteria into the container or the mead. Stir the mixture for about 2 minutes or so, and be sure to seal the container when you are done.- If you are fermenting the mead in a carboy or a container with a narrow opening at the top, you can lightly shake the container to mix it.
-
Wait 10 days then siphon the mead into a clean container from the top. During the fermentation process, a layer of sediment will form at the bottom of the container. Use a siphoning hose or tube to transfer the mead into another clean container to separate it from the sediment. Place the container of mead on a higher surface level, insert a siphon hose in the mead, and shake the hose up and down to start the flow of liquid into a clean container below it. [12] X Research source- Place the siphoning tube at the top of the liquid so you don’t transfer any sediment.
- The clean container should be large enough able to hold all of the mead. If the new container does not have a rubber stopper and airlock, you can clean the sediment out the original container, sanitize it, and add the mead back into it to continue fermenting.
- Check the ABV again with the hydrometer to track the progress of the fermentation.
- Make sure the new container is sterilized.
-
Seal the clean container and allow it to sit for at least 4 weeks. Once you’ve siphoned the mead and separated it from the sediment in the container, seal the new container with an airlock to allow the gasses to escape. Store the container in a warm dry place for a few weeks to continue the fermentation process. Eventually, sediment will collect on the bottom of that container as well, siphon the liquid into another clean container to separate it from the sediment again.- Siphoning, or “racking,” to separate the mead from the collected sediment may need to be repeated several times during the fermentation process. Repeat the racking process until your mead is clear and no longer cloudy. [13] X Research source
-
Check the ABV of your mead before you bottle it. After your mead has fermented for at least a few weeks, it may be ready for bottling. But you need to take another reading with your hydrometer to confirm that the alcohol by volume (ABV) is where you want it to be. [14] X Research source Different tasting meads will have different readings:- Dry tasting mead will read between 0.099 to 1.006.
- Medium tasting mead that is slightly sweet and slightly dry will read between 1.006 to 1.015.
- Sweet mead will fall between 1.012 to 1.020.
- Very sweet dessert mead will read anywhere past 1.02.
-
Fill your bottles from the bottom up. Once your mead is finished and ready for final bottling, use a siphon to transfer the mead from the container. Put a length of tubing from the container of mead to the bottom of the empty bottle, shake the hose up and down in the mead to start the flow, and fill the bottles from the bottom up to minimize exposure to oxygen. Cap or cork the bottles as soon as you finish filling them. You can enjoy the mead whenever you like, but the longer it ages, the more flavorful it will be. [15] X Research source- The bottles and equipment must be sanitized to avoid tainting or spoiling the mead.
- Stored in a cool place away from direct sunlight, your mead can last up to 2 years!
Advertisement
Community Q&A
Search
-
QuestionHow can I tell what proof my alcohol is?Community AnswerYou would use a gauge to tell the specific gravity of the solution before fermentation, which shows the maximum potential alcohol level.
-
QuestionWhat is champagne yeast? Is it okay to use it?Community AnswerThere are a few strains of yeast used to make champagne, sparkling wine and cider. A highly common strain would be Lalvin EC-1118. EC-1118 would be a good choice for mead due to its high alcohol tolerance and acceptable temperature range. Addition of a yeast nutrient and energizer will help this strain to thrive.
-
QuestionHow much alcohol does the final product have? How much yeast do we need? Does it cause problems if we use usual water?Community AnswerAlcohol content varies based on the type of yeast you use, how much honey or other sweetener you use and how long you allow your mead to ferment. Tap water is fine.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You’ll Need
- Homebrewing kit
- Hydrometer
- Large container with an opening for an airlock
- Large pot
- Bottling equipment
References
- ↑ https://www.growforagecookferment.com/how-to-make-a-gallon-of-mead/
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.mnn.com/food/beverages/stories/how-make-your-own-honey-mead
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.growforagecookferment.com/how-to-make-a-gallon-of-mead/
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.mnn.com/food/beverages/stories/how-make-your-own-honey-mead
- ↑ https://www.mnn.com/food/beverages/stories/how-make-your-own-honey-mead
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.mnn.com/food/beverages/stories/how-make-your-own-honey-mead
- ↑ https://www.mnn.com/food/beverages/stories/how-make-your-own-honey-mead
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.popularmechanics.com/home/how-to-plans/how-to/a9228/how-to-make-mead-and-drink-like-a-viking-15703126/
- ↑ https://www.growforagecookferment.com/how-to-make-a-gallon-of-mead/
About This Article
Article Summary
X
If you want to make mead, you'll need a basic brewing kit, which should come with a carboy, a hydrometer, a siphon, and some bottling equipment. To get started, mix 1 gallon of water and 3 pounds of honey in your carboy. Add any fruits, spices, and herbs you want to flavor your mead with, then add some brewing yeast to kickstart the fermentation process. Once you've added everything, seal the carboy and attach an airlock with a rubber stopper. Set the carboy aside, and stir it twice a day for the first 48 hours. After that, let the mead sit for 10 days before siphoning it into a clean container. Let it sit for 4 weeks, and then you're ready to bottle it! To learn how to bottle homemade mead, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,113,846 times.
Reader Success Stories
- "This article was helpful because I am interested in mead. I am trying to make wine from different wild fruits and plants, and trying to understand different terms. I am finding when the term mead is used there is usually honey, not always but a lot. I am trying to make wine like my grandfather did 70 years ago without the nutrients, etc." ..." more
Advertisement
93%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"This article was helpful because I am interested in mead. I am trying to make wine from different wild fruits and plants, and trying to understand different terms. I am finding when the term mead is used there is usually honey, not always but a lot. I am trying to make wine like my grandfather did 70 years ago without the nutrients, etc."
..."
more
"I've been looking online to see how easy this would be to try, considering I've never made alcohol before. I found this article contained enough detail to be a good starting point whilst not being overly complicated or scary."
..."
more
"I love mead. It's so sweet, and it's very enjoyable to drink. And I am so glad to see that I found a well written article on how to make it! "
..."
more
"I'm reading a lot about Nordic myth, and I heard that the gods (Odin, Thor, Prey, and more) drank mead like nectar (Greece myth)."
..."
more
"I make wine, and was just wondering what the process was to make mead compared to making wine. My question was answered."
..."
more
