PDF download Download Article PDF download Download Article

Moving large rocks for landscaping or construction may seem like an impossible task, but there are actually several methods you can use. You can move large rocks small distances with a ratchet hoist or to help you situate the rocks for moving them manually by dragging them or using a plank and rollers. You can also use a skid steer, and while it’s the easiest option, it’s also the most expensive. No matter what method you choose, you’ll be able to move large rocks to a new location.

Method 1
Method 1 of 4:

Using a Ratchet Hoist

PDF download Download Article
  1. Ratchet hoists, also called “come alongs,” can be found at your local home improvement store and online. You could secure the hoist to a strong tree trunk or a trailer hitch. Loop 1 end of the hoist around the immovable object and secure the strap through the hook latch bolt to make sure it won’t come off the object. [1]
  2. Generally, a ratchet hoist has 4 in (10 cm) wide nylon straps attached to it. Loop the straps around the rock, securing them with a tight knot to make sure that they won’t come loose under tension while you’re moving the rock. [2]
    Advertisement
  3. Once both ends of the hoist are secure, crank the ratchet by moving it back and forth. Continue cranking the ratchet until the rock has moved to the desired location. At that point, remove the straps from the immovable object and the rock. [3]
  4. Advertisement
Method 2
Method 2 of 4:

Dragging Rocks

PDF download Download Article
  1. Wedge a pry bar underneath the rock and balance it on a wooden block to gain leverage. Pry the rock loose, and use a shovel to remove dirt and other debris out from under from the rock. [4]
  2. Tie a rope around an old tire, looping the rope through the hole in the middle. Then, cover the tire with a large piece of fabric, like an old sheet. The fabric will prevent the rock from getting wedged in the tire. Roll or lift the rock onto the tire, using a pry bar or ratchet hoist if necessary. [5]
  3. Put on thick gloves and grab onto the rope that is tied to the tire. Use the rope, drag the tire and the rock to the desired location. Then, roll or lift the rock off of the tire into the spot you want it. You can use a pry bar or ratchet hoist if needed. [6]
  4. Advertisement
Method 3
Method 3 of 4:

Using a Plank and Rollers

PDF download Download Article
  1. Lay out 4 iron pipes on the ground. Make sure they are parallel to each other and evenly spaced. The length of the pipes and how far apart to space them depends on the size of the plank and rock you want to move. [7]
  2. An old sheet of plywood works well for a plank. Center it on top of the 4 pipes, then roll or lift the rock onto the plank. Use a pry bar or ratchet hoist to move the rock if necessary. Do your best to center the rock on the plank. [8]
  3. Push the rock so that the plank rolls across the pipes. When the plank has moved enough that a pipe is visible behind it, move that pipe in front of the other pipes so the plank can roll across it. Continue moving the pipes and rolling the plank until you reach the desired location. Then, move the rock off the plank and pipes, using a pry bar or ratchet hoist if you need to. [9]
  4. Advertisement
Method 4
Method 4 of 4:

Moving Rocks with a Skid Steer

PDF download Download Article
  1. You can find companies in a phone book or online that allow you to rent a skid steer. Make sure that the company you choose will provide an experienced operator if you don’t know how to use a skid steer yourself. Explain that you need to move large rocks and make an appointment for the skid steer and operator to meet you where the rocks are located. [10]
    • A skid steer is a multipurpose vehicle, like a Bobcat, that can be used to move heavy objects.
    • It typically costs around $175 to rent a skid steer for 4 hours, plus the labor rate of around $50 per hour for the operator.
  2. Generally, a skid steer with a bucket or forks will be used for moving large rocks. Point out the rocks you need moved to the operator so they can load them into the bucket or onto the forks. The operator will place the forks or bucket underneath the rocks and lift them up. [11]
  3. Make sure the path is clear for the skid steer to move from 1 location to the next. Once you’ve got the skid steer in the right location, ask the operator to unload the rocks. They will lower the forks or bucket and deposit the rocks on the ground. [12]
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you move large rocks without heavy equipment?
    Matt Daly
    Landscape Designer
    Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices.
    Landscape Designer
    Expert Answer
    Use a wheelbarrow! Transfer the rocks directly from the truck, but make sure that there's someone along the front and back of the equipment. Another easy way to do it is with a ball cart, which is what you typically use to move large trees around the property with just one person.
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Things You’ll Need

      Using a Ratchet Hoist

      • Ratchet hoist
      • Immovable object (as an anchor)

      Dragging Rocks

      • Prybar
      • Wooden block
      • Shovel
      • Rope
      • Tire
      • Large piece of fabric (like an old sheet)
      • Gloves

      Using Planks and Rollers

      • 4 iron pipes
      • Plank (like a piece of plywood)

      Moving Rocks with a Skid Steer

      • Skid steer and qualified operator

      About This Article

      Article Summary X

      To move large rocks, try using an old tire. First, tie a rope around the tire. Then, roll or lift the rock into the center of the tire, which will be easier to pull around. You can also use a pry bar to help if the rock’s really heavy. Another method you can try involves rolling the rock on iron pipes and a wooden plank. Lay 4 pipes in front of the rock and place the plank on top. Once you’ve got the rock on top of the plank, roll it slowly across the ground, moving the pipes from the back of the plank to the front. If you need to move a rock a long distance, consider renting a skid steer, which is a small vehicle with a shovel on the front for carrying things. For more tips, including how to move large rocks using a ratchet hoist and a truck, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 160,671 times.

      Did this article help you?

      Advertisement