How to Replace Your Weed Eater String

PDF download Download Article
A no-nonsense guide on restringing a weed wacker
PDF download Download Article

If your weed wacker keeps getting caught on thick overgrowth or the string on your trimmer keeps getting tangled up, it may be time to replace the wire. Rest assured that this is typically very easy to do since all weed eaters are basically designed the same way—even if you have a trimmer with 2 or 3 separate strings sticking out. In this article, we’ll show you how to restring your lawn trimmer in simple, straightforward steps.

Things You Should Know

  • Remove the cap covering up the spool of wire by pressing the tabs on the side, prying it off, or unscrewing it counterclockwise.
  • Pull the spool out and unravel the old wire, but note how the wire was attached to the spool.
  • Cut off 20–25 feet (6.1–7.6 m) of replacement string and attach it to the spool the same way the old string was attached.
  • Reinstall the spool and put the cap back on to finish restringing your weed whacker.
1

Remove the cap on the trimmer.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/6\/6a\/Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-5.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-5.jpg","bigUrl":"\/images\/thumb\/6\/6a\/Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-5.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-5.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Flip the trimmer upside down. The cap is the container housing the spool of wire inside of the lawn trimmer. Take the battery out (or unplug the trimmer if it has a cord). Then, either unscrew or pop the cap off. On a lot of caps, you press on the 2 tabs locking the cap in place to remove it.
    • On some trimmers, there is a little divot where you just pry the cap off with your finger.
    • If this is an older whipper snipper or it has been a while since the thread has been changed, the cap will probably stick a bit—you may need to use a bit of pressure.
    • On some newer trimmers, you don’t even take the cap off. You just pull out the old line and feed a new one into it (Ryobi in particular seems fond of this design).
    • There are some minor variations between brands, but the vast majority of lawn trimmer strings are changed the way we’ll outline here. Always refer to your instruction manual for unique instructions.
    2. Advertisement
2

Take out the spool.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/f\/fb\/Change-the-String-on-a-Lawn-Trimmer-Step-2-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-2-Version-6.jpg","bigUrl":"\/images\/thumb\/f\/fb\/Change-the-String-on-a-Lawn-Trimmer-Step-2-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-2-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    The spool is the only thing inside of the lawn trimmer’s cap, so lightly jostle it loose if it won’t come free on its own. Remove the entire spool with the wire attached and set the trimmer aside.
    • You may need to cut the wire where it sticks out of the housing if it’s stuck. Use nippers, tin snips, or shears if you need to.
    • Take a mental note of which side of the spool is facing out when you remove it. You can only install it one way normally, but it may make things easier if you remember the orientation now.
3

Remove the previous string.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/71\/Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-6.jpg","bigUrl":"\/images\/thumb\/7\/71\/Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-3-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Pay close attention to how the final 5–6 inches (13–15 cm) of the thread are connected to the spool. You’re going to attach your new string in the exact same way. Usually, there is a loop or opening in the spool that the end of the string goes through to pin the string in place. [1]
    • If the string isn’t inserted into a loop or opening, there may be a tiny clip that pins that wire against the center of the spool.
    • If there are 2 or 3 different lengths of string, you may need to insert 2 or 3 lengths of string into the openings.
    2. Advertisement
4

Insert the new wire into the spool.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/5\/59\/Change-the-String-on-a-Lawn-Trimmer-Step-4-Version-5.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-4-Version-5.jpg","bigUrl":"\/images\/thumb\/5\/59\/Change-the-String-on-a-Lawn-Trimmer-Step-4-Version-5.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-4-Version-5.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Attach the new string the same way the old string was installed. Unpack your replacement wire and clip off roughly 20–25 feet (6.1–7.6 m) using shears, nippers, or tin snips. Take any end of the string and thread it through the spool the same way your old string was attached.
    • The round wire tends to hold up better than the flat plastic stuff, but whipper snippers aren’t universally compatible with any kind of string. Refer to your manual to determine what kind of wire you can use.
    • Some newer trimmer models sell pre-wound spools you can simply swap out instead of replacing the string (Black and Decker models are the most popular brand that does this).
    • If you have a 2-string trimmer but there’s only one opening for it on the spool, pull the string through the opening until you’ve reached the middle so you have 2 equal haves hanging off the spool.
5

Wind the new string up tightly.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/6\/6f\/Change-the-String-on-a-Lawn-Trimmer-Step-5-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-5-Version-6.jpg","bigUrl":"\/images\/thumb\/6\/6f\/Change-the-String-on-a-Lawn-Trimmer-Step-5-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-5-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You don’t need to be super precise here, but aim to keep the wire evenly distributed. There’s usually an arrow that tells you which direction the string goes, but when in doubt, roll it clockwise. Keep it taut and firm all the way around and build the spool up to just below the rim.
    • Do not add so much string that it extends past the rim of the spool.
    • If you have a 2- or 3-line trimmer, roll the wire evenly around each of the individual sections (a 2-line trimmer will have 2 slots, and a 3-line trimmer will have 3 slots).
    2. Advertisement
6

Clip the excess wire off.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/f\/fd\/Change-the-String-on-a-Lawn-Trimmer-Step-6-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-6-Version-6.jpg","bigUrl":"\/images\/thumb\/f\/fd\/Change-the-String-on-a-Lawn-Trimmer-Step-6-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-6-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    You need a little bit of extra wire to hang out and rip the foliage when your trimmer runs. Use your tin snips, nippers, or shears to cut the wire. Hold the rolled up spool tight by hand and grab your trimmer to reinstall the cap and spool together. [2]
    • On some trimmers, you can lock the spool in place by pressing on tabs or squeezing the spool together until you hear a click.
7

Attach the spool to the trimmer.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/74\/Change-the-String-on-a-Lawn-Trimmer-Step-7-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-7-Version-6.jpg","bigUrl":"\/images\/thumb\/7\/74\/Change-the-String-on-a-Lawn-Trimmer-Step-7-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-7-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Flip the end of the trimmer over and carefully slide the spool into place. Set the opening in the middle of the spool over the axle in the lawn trimmer and thread the wire through the opening on the trimmer where the string sticks out and rotates. [3]
    • Remember to orient the spool the same way it was oriented when you removed it! There will typically be a logo or note on the side that’s supposed to face away from the trimmer.
    2. Advertisement
8

Lock the cap in place.

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/e\/e2\/Change-the-String-on-a-Lawn-Trimmer-Step-8-Version-6.jpg\/v4-460px-Change-the-String-on-a-Lawn-Trimmer-Step-8-Version-6.jpg","bigUrl":"\/images\/thumb\/e\/e2\/Change-the-String-on-a-Lawn-Trimmer-Step-8-Version-6.jpg\/v4-728px-Change-the-String-on-a-Lawn-Trimmer-Step-8-Version-6.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Take the cap that you removed from the trimmer and set it in place. Push it down gently until you hear a click, screw the cap on, or align the tabs and lock them together. However you removed the cap, reverse the steps to put the cap back on. [4]
    • Once the cap is locked, you’re good to go! Your whipper snapper cord will cut and trim like new.

Community Q&A

Search
Add New Question
  • Question
    I have a Mounrfields trimmer. On the line spool it has arrows. Do I wind the line in the direction of the arrows?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You always wind the spool in the direction of the arrow. That's pretty universal regardless of the trimmer model and brand.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 8
  • Question
    Why does my line retreat into the spool after just a few swipes of my freshly rewound spool?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Unfortunately, it's too short. You need to redo it with a longer length of string. Your line should always be flush with the spool plus an additional 6 inches or so of length.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 10
  • Question
    Are the eyelets on a string trimmer head absolutely essential, or can I do without them? They've been lost is why I'm asking
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Frankly, you're probably okay so long as the spool is tight. Just take it slow the first time you run the trimmer to ensure the spool doesn't fly out of the casing. It should probably be alright, though.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Change your weed eater’s string at least once a year to ensure it cuts cleanly and efficiently.
        Thanks
        Helpful 0 Not Helpful 4
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      Sharpen Your Lawn Mower Blade for a Clean, Precise Cut
      How to
      Replace the Line on a Black and Decker Trimmer
      How to
      Start a Stubborn Weed Trimmer With a Thimble and Some Gas
      How to
      Edge a Lawn
      Berms: What They Are and How to Add One to Your Landscaping
      How to
      Sharpen Hedge Trimmers
      How to
      Cut Asphalt
      How to
      Move Large Rocks
      How to
      Grow Ivy on a Brick Wall
      How to
      Dry Pampas Grass
      How to
      Dig Swales
      How to
      Fix a Wheelbarrow Tire (tubeless)
      How to
      Start a Snowblower
      How to
      Cut Plastic Lattice
      Advertisement

      References

      1. ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf
      2. ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf
      3. ↑ https://files.snowjoe.com/product-manuals/TRJ608E%20MANUAL_ENG%2007302020-M%20FINAL.pdf
      4. ↑ https://cdn.powerequipment.honda.com/pe/pdf/manuals/31VJ4001.pdf

      About This Article

      Article Summary X

      Before you change the string on a lawn trimmer, make sure your trimmer is turned off and that the engine is cool to the touch to avoid any injuries. Check on the manufacturer's website to see what kind of line you need and cut it to the correct length. Then, remove the retaining cap from the trimmer head and locate the start of the trimmer line spool. Start inserting your new line by wrapping it in neat, straight rows to avoid jams. Finally, line up the retainer with the slot on the outside of the head and reattach your retaining cap. To learn how to change the line on a double-line trimmer, scroll down.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,168,802 times.

      Reader Success Stories

      • Leo Merton

        Oct 23, 2016

        "Have had nothing but trouble with my Qualcast trimmer; the wire keeps breaking. I hope that I can put a sturdier ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement