Download Article
Download Article
Sheetrock, also known as drywall, is a type of plaster surface used to provide a durable and sturdy surface for interior and exterior walls. It is usually installed with glue or screws, and, after installation, finished with a plaster surface that is then sanded down until smooth. Painting over sheetrock hides the plaster's irregularities and adds color to a room; it can also seal the sheetrock to protect it from water damage. Before painting, always prime the sheetrock to provide a coat for the paint to adhere to and to help give a more even appearance.
Steps
Download Article
-
Remove all sanding debris. [1] X Research source
- Sanding down sheetrock produces thousands of small particles that must be removed before applying paint. Use a vacuum with a brush extension and go over the sheetrock until it is clean. You can also use a micro-fiber cloth and rub the sheetrock down to remove particles.
-
Cover all holes, nails, and screws with joint compound or masking tape. [2] X Research source
- The sheetrock needs to be an even surface before you can begin painting. Fill holes and cracks with joint compound. Nails, screws, and other protrusions can either be covered over with joint compound or temporarily covered with masking tape.
Advertisement -
Choose a primer. [3] X Research source All surfaces must be primed before painting, including sheetrock. Do not skip this step! Apply in thin layers; follow the label instructions for how many layers are required.
- Your primer will seal the sheetrock from water, cover over all irregularities in the surface, and provide a coat for the paint to adhere to. Polyvinyl acetate (PVA) is designed specifically for sheetrock. Latex paint is also an effective primer.
- Choose a primer that roughly matches the color of your final coat of paint. Approximating the color is fine. If you are using light paint for your second coat, be sure not to use a dark color for your primer.
-
Apply the primer with a paint roller. [4] X Research source
- Dip the roller into a pan filled with the primer. Roll the primer onto the sheetrock in "M" or "W" designs so that the roller is constantly in motion; go back over these designs to fill in the gaps. You should create an even coat over the sheetrock so that no roller marks are evident.
-
Let the primer dry for about 4 hours. [5] X Research source
-
Go over the primer coat with sanding paper to remove any imperfections. Clean the dust off with a vacuum or micro-fiber cloth. [6] X Research source
-
Apply the first coat of paint with a paint roller. [7] X Research source
- Use the same technique that you used with the primer. Apply a thick coat of paint to hide any imperfections in the sheetrock.
- Suitable paint for sheetrock would be 100% latex, acrylic latex, or artist’s acrylic paint. Acrylic and latex paints breathe, and provided they are applied properly, they will be durable and long-lasting.
-
Let the first coat dry for about 4 hours.
-
Go over the first coat of paint with sanding paper to remove any imperfections. Clean the dust off with a vacuum or micro-fiber cloth.
-
Apply a second coat of paint. [8] X Research source
-
Let the second coat dry for about 4 hours.
-
Remove all tape from the sheetrock.
Advertisement
Community Q&A
Search
-
QuestionWhen I install sheetrock, do I have to add texture to the walls?DonaganTop AnswererMost people don't. It's a matter of personal preference.
-
QuestionShould you use flat or satin paint for the walls?DonaganTop AnswererSatin is easier to keep clean.
-
QuestionShould you still use primer if the paint has primer in it?DonaganTop AnswererNo.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Be sure to apply heavy coats of primer and paint. Even after sanding sheetrock usually has a mottled appearance, so adding lots of paint is essential to attaining a flat, even surface.Thanks
- Satin or latex paints are usually best for sheetrock. Gloss or sheen paints, even after two coats, can highlight irregularities in the sheetrock's surface.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Vacuum or micro-fiber cloth
- Joint compound
- Masking tape
- Paint roller
- Paint pan
- Primer (polyvinyl acetate or latex paint)
- Latex or satin paint
References
- ↑ https://www.bradthepainter.com/painting-drywall/
- ↑ https://www.familyhandyman.com/drywall/drywall-repair/how-to-paint-walls-prepare-interior-walls-for-painting/
- ↑ https://www.youtube.com/watch?v=ETRU3AxYq0w
- ↑ https://www.youtube.com/watch?v=ETRU3AxYq0w
- ↑ https://www.youtube.com/watch?v=ETRU3AxYq0w
- ↑ https://www.youtube.com/watch?v=McKzQqQcEGg
- ↑ https://www.youtube.com/watch?v=yh8gqk2the0
- ↑ https://www.youtube.com/watch?v=yh8gqk2the0
About This Article
Thanks to all authors for creating a page that has been read 185,146 times.
Reader Success Stories
- "That primer needed to be applied! The fellow I hired to do the sheetrock screwed up because the paint isn't adhering like it should. I wish I had seen these instructions in advance of the job, now I have to have someone else fix it." ..." more
Advertisement
93%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"That primer needed to be applied! The fellow I hired to do the sheetrock screwed up because the paint isn't adhering like it should. I wish I had seen these instructions in advance of the job, now I have to have someone else fix it."
..."
more
"I can paint my ceiling now with confidence."
