How to Paint a Room

PDF download Download Article
PDF download Download Article

Painting is a great way to give a fresh look to a room, whether you’re taking on an extensive remodeling project or you just want to change things up. Even better, it’s a relatively inexpensive project that you can take on yourself, even if you’ve never painted a room before. Start by emptying the room and cleaning and sanding the walls. Then, add 1-2 coats of primer, or choose a 2-in-1 paint and primer and skip straight to painting!

Part 1
Part 1 of 3:

Prepping the Room and Your Supplies

PDF download Download Article
  1. Interior paint is meant to have a smooth finish that's easy to clean. Exterior paints, on the other hand, may have chemicals added meant to preserve the paint against exposure to the elements, so it's safest to use interior paint when you're painting indoors. [1]
    • The 2 primary options for indoor paint are water-based and oil-based paints. Water-based paint is a versatile paint that you can use almost anywhere. It's also quick-drying and is low in the chemicals that create harsh fumes. However, if your wall was previously painted with oil paint, the water-based paint may not stick.
    • Oil-based paint has strong fumes, but it has a rich, glossy finish and is very durable. It's great for use in rooms with higher humidity, like a kitchen or bathroom. If you're a novice painter, the longer drying time can give you more time to fix errors.
    • Latex paint is another option for interior paint. However, it's not as durable as water- or oil-based paints.
  2. When you’re determining how much paint you’ll need, measure the width and height of each wall. Then, multiply those two numbers together to get the area of each wall. Add the areas from all the walls. If it’s less than 400 sq ft (37 m 2 ), you’ll probably only need 1 US gal (3.8 L) of paint. If it’s more, buy extra paint. [2]
    • You’ll typically need more paint if you're using a dark color, if the wall is textured, or if the walls are dark and you want to switch to a light color.
    • This estimate works for primer, as well.
    • You can also use a paint calculator to determine how much paint you’ll need, which you can find online. Just type “paint calculator” into your search engine.

    Tip: Consider painting a small swatch of several different shades before you decide on the final color. That way, you can see how it looks in different lights.

    Advertisement
  3. Before you start painting, empty the room of as many furnishings as possible. Take everything off of the walls, move lightweight furniture to another room, and roll up rugs and store them elsewhere. If there’s anything that has to stay in the room, like a big, heavy piece of furniture, push it to the center of the room. [3]
    • Remember to remove outlet covers and light switch covers so you don’t accidentally paint them! You’ll probably need a Phillips-head screwdriver for that.
  4. Drape plastic sheets or tarps over the floor, along with anything you had to store in the center of the room. [4] Even if you’re very careful, paint can drip or splatter, and it can be hard or sometimes even impossible to remove paint from some surfaces without damaging them. [5]
    • You can purchase plastic sheeting wherever paint supplies are sold.
    • Avoid using cloths to cover the floor and furniture, like towels or bedsheets. The paint can soak through the fabric, and the stains will be harder to clean if you don’t notice them right away.
  5. TSP is a cleaner that cuts through dust and grease, which can prevent paint from adhering to the wall. You can buy it wherever paint supplies are sold . It comes in liquid form, or you can buy a concentrate that has to be mixed with water. Either way, read the label instructions carefully before you use it.
    • Wear gloves and long sleeves when you’re working with TSP, as it can be irritating to your skin.
    • If you don’t have access to TSP, use soap and water instead.
    • Fix any cracks or holes in the walls before you paint. [6] You should also remove any nails, adhesives, or anything else that you don’t want to paint over.
  6. Peel off a piece of tape that’s about 12 in (30 cm) long and use your fingers or a putty knife to press it down along the line you want to paint. Then, tear off another strip that’s about the same size and overlap it slightly with the one you just put down. This will help prevent gaps that might allow paint to seep through. [7]
    • Choose a painters tape designed for the type of wall you’re painting (such as drywall, wood, or wallpaper).
    • Cover the areas you do not want to paint with tape. [8]
  7. Paint fumes can be dangerous, so it’s important to work in a well-ventilated area. Open the windows and doors to the room, and turn on a fan if you have one nearby. [9]
    • Unfortunately, opening windows and doors does run the risk of dirt, dust, pollen, and insects flying into the room, and potentially getting stuck in the paint. If you can, try to open only the windows that are covered with a screen, or tape a piece of mesh over the window if that’s not an option..
    • Fumes from painting can potentially cause you to become dizzy, short of breath, and nauseous. You might also experience headaches. If you notice any of this, go to an area with fresh air, and double-check the ventilation in the room. [10]
  8. If the walls are already glossy or slick, paint might have a harder time adhering to the existing finish. Use a fine-grit sandpaper, like 220-grit, and go over the walls lightly in a circular motion. Sand just enough to remove the shiny surface of the paint, then wipe down the walls with a dry cloth to remove any dust. [11]
    • Don’t sand enough to sand down into the paint or the wall underneath, as this might create an uneven appearance in your finished paint job.
    • This job will go a lot faster if you have an orbital sander. If you don’t have one, you may be able to rent one from a nearby home improvement store. However, you can also sand by hand if that’s a better option for you.
    9. Advertisement
Part 2
Part 2 of 3:

Applying Primer

PDF download Download Article
  1. You don’t always have to prime a wall before you paint it. However, if it’s a wall that’s never been painted before, if you’re going from a very dark to a very light color (or very light to dark), or you had to patch up any holes in the wall, you should prime the walls. This creates a smooth base that will result in a more even application of your final paint color. [12]
    • If you're painting a wall that's already been painted, it's fine to use a paint and primer in one, rather than priming separately. [13]

    Tip: If you're using a 2-in-1 paint and primer, you don't need to use a separate primer first!

  2. Paint and primer can settle or even separate as they sit. When you first open the can of primer, give it a good stir to ensure it’s evenly mixed. [14]
    • If the primer has been sitting for a while, you may want to shake the can vigorously before you open it, then stir it afterward.
  3. This is a technique known as “cutting in,” and it makes it easier to paint with a roller. Dip a 2 1 ⁄ 2  in (6.4 cm) angled paintbrush brush in the primer and tap it against the side of the can to remove excess. Then, carefully glide the brush along any doorways, trim, windows, and the ceiling, using the tip of the brush to get as close to the trim as possible without painting it. [15]
    • Painters who are experienced enough at cutting in might not even have to use painter’s tape!
  4. Pour some primer into a paint tray and add a screen. Slip a clean cover onto your roller, then dip the cover into the primer in the tray. Roll the cover across the screen once to remove any excess, then roll the primer along the wall. When you start seeing small gaps where you’re painting, it means the cover is getting dry and it’s time to add more primer. [16]
    • Painting in an M or a W motion can help you avoid streaks in your primer.
    • You can find rollers, covers, paint trays, and screens at your local home improvement store or paint store.
  5. You may need 2 coats of primer to get full coverage. Allow the primer to dry according to the manufactuer’s instructions, then look at the room. If you can easily see the wall underneath the primer, you probably need another coat. If it looks fairly solid, one coat of primer may be enough. [17]
  6. Once all of your coats of primer have dried completely, go over it with 220-grit sandpaper. Don’t sand away all of your primer—you don’t want to undo the work you just did. Instead, sand just enough to create a slightly rough surface.
    • This will help the paint bond to the wall better, giving it a smoother appearance when you’re finished.
    7. Advertisement
Part 3
Part 3 of 3:

Painting the Walls

PDF download Download Article
  1. Paint can settle as it sits, which can sometimes lead to the color being more concentrated at the bottom of the can. To avoid getting an uneven application, stir the can with a paint stick as soon as you open it. If the paint’s been sitting a while, you might even want to shake the can vigorously first, then open it. [18]

    Tip: If you’re painting a large room, combine multiple paint cans into one large bucket in case the color varies slightly from can to can. You can either pour the paint into a tray or place a screen in the bucket.

  2. Dip your brush into the can and tap it to remove any excess. Then, carefully run the paintbrush along the trim, about 1 ⁄ 2  in (1.3 cm) from the edge where you want the paint to stop. Then, go back over the same section a second time, this time painting all the way to the trim.
    • Typically, you’ll get the best results by cutting in one wall at a time, then rolling that wall before moving to another.
    • Cutting in around the doors, windows, and ceiling is more intensive than rolling the walls. If you do roll the walls first, you may be more tired, which can make you more likely to make mistakes. [20]
  3. Unless you’re using a large bucket with a screen, you’ll need to use a paint tray. Carefully pour some of the paint from the can directly into the tray. You don’t need much; just enough to cover the bottom of the deepest part of the tray.
    • Place a metal paint screen in the tray, as well.
  4. Fit the roller with a cover, then lower the roller into the deep end of the paint tray. Once you've picked up some paint, roll the paint roller across the metal paint screen to remove excess paint.
    • Roller covers are sold according to the thickness of the nap, or the fibers that make up the cover. For an interior painting job, a 1 ⁄ 2 – 3 ⁄ 4  in (1.3–1.9 cm) nap will give you plenty of coverage, but it won't soak the walls with too much paint like a deeper nap might. [21]
  5. Once you've put paint on the roller, lift the roller and place it against the wall close to where you cut in along the ceiling. However, avoid starting right at a corner or other edge, as you might end up with a thick layer of paint that will be hard to smooth out. Instead, start about 6 in (15 cm) from the edge and work your way back. [22]
    • Don't put the roller all the way on the top of the wall, or you might accidentally paint the ceiling.
  6. This will help you avoid having streaks in the paint. Try to paint all the way up to where you cut in along the ceiling, then all the way back down to where you cut in on the bottom trim. [23]
    • If you’re having trouble painting from the top of the wall to the bottom in an even motion, draw an imaginary horizontal line halfway down the wall. Paint a v-shape above the line, then another below, overlapping the wet edges of paint slightly.
  7. You’ll almost always need at least 2 coats of paint to get a professional-looking finish. Allow the paint to dry as long as the manufacturer suggests, then go back over the whole wall with a second coat of paint. [24]
    • Don’t try to just touch up certain spots, as the end result will look messy. Apply an even coat of paint to the whole wall, instead.

    Tip: If you need to let your paint dry overnight, either wash your brushes or place them in a resealable plastic bag to keep the paint from drying on the bristles.

  8. When you’re satisfied with the look of your paint job, it’s time for the clean up! Carefully pull away the strips of painters tape from the borders of the room. Then, remove the drop cloths, wash your brushes, and put everything back in the room. [25]
    • If the paint seeped under the tape, consider whether you should paint the trim to cover it up.
    9. Advertisement

Expert Video


Expert Q&A

Search
Add New Question
  • Question
    When you're painting a room, where should you start?
    Barry Zakar
    Handyman
    Barry Zakar is a professional handyman and the founder of Little Red Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.
    Barry Zakar
    Handyman
    Expert Answer
    answer video
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
  • Question
    How do you protect the floor when you are painting the walls?
    Patrick Coye
    Painting Specialist
    Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.
    Patrick Coye
    Painting Specialist
    Expert Answer
    You can protect the floor by using a plastic drop cloth. It does not bleed through and also prevents dust from getting through. So it is easier to clean up.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    What is the benefit of using textured paint?
    Patrick Coye
    Painting Specialist
    Patrick Coye is the owner and operator of Patrick’s Painting & Home Improvement in Alexandria, Virginia. With over 15 years of experience in residential construction, Patrick specializes in painting, wallpaper removal/installation, drywall, staining decks and fences, and kitchen cabinetry painting. To date, Patrick and his team have painted over 2,000 houses and stained over 800 decks. Patrick's Company won a "Top Job" award from the American Painting contractor magazine in 2020.
    Patrick Coye
    Painting Specialist
    Expert Answer
    Textured paints have a lot of roughness, so they naturally hide the imperfections in the wall.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You'll Need

      Prepping the Room

      • Screwdriver
      • Plastic sheeting
      • Sponge
      • Trisodium phosphate (TSP) or soap and water
      • Painter's tape
      • 220-grit sandpaper
      • Orbital sander (optional)
      • Fan (optional)
      • Mesh for covering unscreened windows (optional)

      Applying Primer

      • Primer
      • Paint stick
      • 2 1 ⁄ 2  in (6.4 cm) angled paintbrush
      • Paint roller
      • Roller cover
      • Paint tray
      • Metal paint screen
      • 220-grit sandpaper

      Painting the Walls

      • Paint stick
      • Paint can opener or flathead screwdriver
      • Paint tray and metal paint screen
      • Large bucket and screen (alt)
      • Plastic wrap
      • Paint roller
      • 2 1 ⁄ 2  in (6.4 cm) angled paintbrush
      • Roller cover with 1 ⁄ 2 – 3 ⁄ 4  in (1.3–1.9 cm) nap

      Tips

      • Keep a damp rag close by while you’re priming and painting so you can wipe up mistakes quickly.
        Thanks
        Helpful 6 Not Helpful 0
      • If you have a large area to paint which cannot be completed in one go, you can take a break in between. Instead of cleaning the paintbrush every break, you can keep it wet, thus conserving time and water.
        Thanks
        Helpful 1 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Paint Ceiling Edges
      How to
      Paint Baseboards with Carpet
      How to
      Prepare a Room for Painting
      A Guide to Painting with a Roller Brush
      How to
      Paint Designs on Walls
      How to
      Paint with a Compressed Air Sprayer
      How to
      Create Clean Paint Edges on Interior Walls
      How to
      Tape Off a Room for Painting
      The Best Compliments for Someone’s Singing or Speaking Voice
      How to
      Transfer Images to Ceramic
      Learn to Paint Ceramic Like a Pro
      How to
      Paint PVC
      How to
      Paint Silicone
      How to
      Paint a High Ceiling over Stairs
      Advertisement

      References

      1. ↑ https://www.elledecor.com/home-remodeling-renovating/home-renovation/advice/a2777/different-types-paint-finishes/
      2. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      3. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      4. ↑ Patrick Coye. Painting Specialist. Expert Interview. 22 July 2020.
      5. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      6. ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
      7. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      8. ↑ Patrick Coye. Painting Specialist. Expert Interview. 22 July 2020.
      9. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      1. ↑ https://health.clevelandclinic.org/home-diy-project-6-tips-avoid-dangerous-fumes-substances/
      2. ↑ https://www.thisoldhouse.com/how-to/how-to-paint-room
      3. ↑ https://www.thisoldhouse.com/how-to/how-to-paint-room
      4. ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
      5. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      6. ↑ https://www.familyhandyman.com/painting/techniques/the-best-tips-for-cutting-in-paint/view-all/
      7. ↑ https://www.thisoldhouse.com/how-to/how-to-paint-room
      8. ↑ https://www.todayshomeowner.com/how-to-paint-a-room-like-a-pro/
      9. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      10. ↑ Patrick Coye. Painting Specialist. Expert Interview. 22 July 2020.
      11. ↑ Barry Zakar. Handyman. Expert Interview. 16 July 2020.
      12. ↑ https://www.todayshomeowner.com/how-to-paint-a-room-like-a-pro/
      13. ↑ https://www.familyhandyman.com/painting/techniques/paint-roller-techniques-and-tips/view-all/
      14. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      15. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room
      16. ↑ https://www.architecturaldigest.com/story/how-to-paint-a-room

      About This Article

      Article Summary X

      If you want to paint a room, first determine how much paint you’ll need by measuring the square footage of the room. Measure the width and height of each wall, and multiply those two numbers together to get the area of each wall. Purchase 1 US gal (3.8 L) of paint for every 400 sq ft (37 m2) you need to paint. When you are ready to begin painting, remove as much furniture from the room as possible, taking care to protect the floor with a drop cloth or plastic sheet. Line the borders of any trim, outlets, or casings with painter's tape. Next, wash the walls with a sponge and a TSP cleaner. After the walls dry, pry open the primer can and stir the primer with a paint stick. Then, apply a coat of primer with a brush and a roller. First, use an angled brush to cut in any doorways, trim, windows, and the ceiling. Then, use a roller to paint the walls. Roll the paint onto the wall using V-shaped or M-shaped motion to avoid having streaks in the paint. Try to paint all the way up to where you cut in along the ceiling, then all the way back down to where you cut in on the bottom trim. Let the primer dry completely, and then pry open the paint can and stir it with a paint stick. Repeat the process with a can of paint. Pry open the can, stir the paint, and apply the first coat of paint using a brush and a roller. Wait for the first coat to dry completely before deciding if you want to add a second coat. For tips on choosing the best paint for your project, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,413,866 times.

      Reader Success Stories

      • Tracy Bromley

        Jul 28, 2017

        "I am painting a lady's front room for her. Although I have painted before, it has never been for anyone else, ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement