Download Article
Download Article
Learning how to read tide tables is an essential skill for those whose livelihoods or forms of recreation depend on the ocean, such as fishermen, divers, and surfers. Finding low tide is also important for beach combing or looking at tide pools. Reading an ocean tide table can be complicated, but with a little practice you can learn how to read and interpret one.
Steps
-
Find a tide table. You should use one specific to the area you plan to visit, as beaches, harbors and fishing sites that are near each other can have dramatically different tides.
- Local newspapers typically print tide tables near weather information.
- Marinas are likely to have tide tables specific to the area.
- Reference stations constantly collect data to provide detailed tide information. Their findings are available online and can be found through a simple search.
-
Locate the relevant date. Tidal information may be printed for a week or more in advance. If you are planning an outing for tomorrow, use tomorrow’s date. If your plans are flexible, look instead for the data that is most important to you, such as finding a low tide at a convenient time. This may mean waiting several days for the best opportunity.
- Remember that high and low tide times will be different every day, so do not make plans for the future based on a chart for the present.
Advertisement -
Understand Chart Datum. This term refers to a plane of reference against which tidal heights are measured. It is an average of low tide heights. This number is set low so that most low tides will not fall below it. It is also the reference point that nautical charts use to measure depth. [1] X Research source
-
Find high tide information. High tide will be expressed as a positive number, sometimes with a plus (+) sign before it. This number indicates how high above Chart Datum the tide will be at its greatest swell. [2] X Research source
- A high tide indicated as an 8 tells you that at its highest, the water will be 8 feet (2.4 m) above the average low water mark.
- Remember that outside the United States the metric system prevails and measurements will be in meters, not feet.
-
Find low tide information. Low tide will be expressed as a small number, or possibly a negative number. This number indicates the relationship between the water depth at its lowest ebb and Chart Datum. Because Chart Datum is an average, not the absolute lowest the tide could ever be, sometimes low tide will fall below the average low water mark. [3] X Research source
- When low tide is expressed as a negative (-), it means the tide will fall below Chart Datum. For example, -1 means the low tide will be 1 foot (0.30 m) below the average low water mark.
- The low tide may also be a positive number. The number 1.5 indicates that the lowest tide will be 1.5 feet (0.46 m) above Chart Datum.
-
Read the time. Depending on location, high and low tides may occur twice in a day or only once. The time may be listed using a 24 hour clock, also known as military time. Be certain that you have distinguished properly between morning and evening tide times.
- To read a military clock, remember that the numbers continue onward from noon. So 1:00 could also be written as 13:00 because it is noon (12) plus 1 hour (13).
- If the number is large and you don't want to count up, simply subtract 12 to get the number in the a.m./p.m. system. For instance, 23:00-12:00 will be 11 pm.
-
Understand swell direction. This information, often indicated by a letter, tells you from what direction the waves will be coming. For instance, the letter W tells you that the waves will be coming from due west. This information is particularly important for surfers.
- If the beach faces north, but the waves are coming from the northwest, the waves will break differently as they hit the beach or point break.
-
Read height and interval. Some tide tables include predictions about wave height, also referred to as the swell, and wave interval. Wave height is the distance between the crest of the wave and the trough, or the lowest point in a wave. The interval indicates the average number of seconds that elapse between waves as they hit an offshore buoy. [4] X Research source
- For surfing purposes, a longer interval makes for a larger wave.
- Shorter intervals make for gentler waves, which are safer for swimming.
- Large swells and long intervals make for massive surf.
Advertisement
-
Learn tide patterns. Understanding the local pattern can help you predict whether you will have 2 daily opportunities to navigate or beachcomb, or only one. [5] X Research source In general, it takes around 6 hours for a tide to fully recede and hit the lowest point, then another 6 hours for it to come back in to the highest point. [6] X Expert Source Michael Reynolds
Professional Fishing Instructor Expert Interview. 26 February 2021.- In many coastal regions, tides rise and fall twice every day. These tides are called semidiurnal tides and are common on the east coast of the United States.
- In some places one of the high tides is dramatically higher than the other, a pattern called mixed tides. This occurs in many places on the west coast of the United States.
- In some places there is only 1 tidal cycle per lunar day, with 1 high and 1 low tide in a 24-hour period. This is common in many places along the Gulf of Mexico.
-
Take advantage of high tide. When the water is at its highest, boats can safely pass over obstacles that might otherwise cause problems, such as reefs or sand bars. This is often the best time to go in or out of harbor.
- Use a nautical chart to help you navigate safely.
- If you are going out in a boat, whether it is a kayak or a large vessel, you need to know the channel depth, which a tide table cannot tell you.
- If you leave the harbor at high tide, make sure your location won’t be on dry land at low tide.
-
Venture out mid-tide. Surfers often find the best waves when the water is between high and low tide, though it varies by location. When the tide is low rocks may be exposed, or kelp may interfere with the board. When the tide is highest waves may not break until they are too close to shore to surf.
- If you are estuary fishing, larger fish will move toward deeper water as the outgoing tide exposes shallow areas. This is a good time to fish in estuaries. [7] X Research source
-
Enjoy low tide. When the tide is out, beachcombers and tide pool enthusiasts have the best opportunity to see marine life exposed. Rocky shores such as those along the Washington and Oregon coast offer the best chance to see marine life in tide pools.
- Lower tide may also be preferable for tall boats that need to pass under bridges. Knowing the clearance of the bridge and the height of your boat can help you choose the best time to navigate in and out of a harbor.
- Low tide exposes mud where you can dig for clams. You can begin digging 1 or 2 hours before the expected low tide and continue your search 1 or 2 hours after the tide begins to come in again. Look for small holes in the sand that squirt juice when you stamp next to them.
-
Factor in the weather. Tides are not the only consideration when fishing or playing near the ocean. Strong winds can change predicted tide depths by a foot or more. Storms can be dangerous for ships or beach goers. The season can also play a role in what fish are present. [8] X Research source
- If you are unfamiliar with the coastal region you’re visiting, consult with locals about what to expect.
- Pay attention to weather forecasts and be cautious in venturing out.
- Rip tides can form on any beach with surf, including the Great Lakes and the Gulf of Mexico. They are often found near jetties or between sand bars. If you are caught in a current that pulls you quickly from shore, swim parallel to the beach to break out of it. [9] X Research source
Advertisement
Expert Q&A
Search
-
QuestionWhat causes the tides?Michael Reynolds is a Professional Fishing Instructor and the Owner of Long Beach, California Fishing Lessons by Michael Reynolds. In his over 40 years of fishing experience, Michael has become very knowledgeable about the variety of fishing methods and techniques. He is passionate about sharing his knowledge with beginners to experienced anglers. Michael has been guiding and teaching fishing for over five years and is licensed and bonded with the Department of Fish and Wildlife (DFW).As the moon orbits the planet, the force which follows drags the ocean, which causes the tides.
-
QuestionWhat does -0.019 low tide indicate?Kody Lee is a Guide for Fishing Trips in Washington. He has worked as a guide since 2015 and has fished his entire life.It means the tide is .019 units below chart datum. A negative number indicates the number is below chart datum.
-
QuestionWhat tide is better for beach walking?
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Remember that tides are forecast, much like weather, so you can't always be sure they will happen exactly as the forecast indicates.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Strong weather can influence ocean tides. It is always a good idea to take the weather forecast into consideration.Thanks
Advertisement
References
- ↑ https://tidesandcurrents.noaa.gov/datum_options.html
- ↑ https://oceanservice.noaa.gov/facts/tide-tables.html
- ↑ https://oceanservice.noaa.gov/facts/tide-tables.html
- ↑ https://tidesandcurrents.noaa.gov/glossary.html#T
- ↑ https://oceanservice.noaa.gov/facts/tide-tables.html
- ↑ Michael Reynolds. Professional Fishing Instructor. Expert Interview. 26 February 2021.
- ↑ https://oceanservice.noaa.gov/education/tutorial_estuaries/est06_habitats.html
- ↑ https://oceanservice.noaa.gov/education/tutorial_tides/tides08_othereffects.html
- ↑ https://www.weather.gov/safety/ripcurrent
About This Article
Article Summary
X
To read a tide table, choose one that’s specific to the area and date you plan to visit. Next, locate the Chart Datum, which is the horizontal line on the table that provides the average low water mark. Then, find the high tide information, which is shown as a positive number and indicates how high the tide will be at its greatest swell. Alternatively, look for a small or negative number to see how low the tide will be in reference to the Chart Datum. For example, if the low tide is 1.5, the lowest tide will be 1.5 feet above the average low water mark. For more tips, like how to understand tide patterns, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 321,819 times.
Reader Success Stories
- "I am new to PWC and interested in tides, as they relate to safety and areas that we want to explore. It is essential that I learn about tides and boater safety; this article is helping me understand those subjects. It is informative and easy to understand." ..." more
Advertisement
"I am new to PWC and interested in tides, as they relate to safety and areas that we want to explore. It is essential that I learn about tides and boater safety; this article is helping me understand those subjects. It is informative and easy to understand."
..."
more
"I am planning a visit to Chek Jawa in Pulau Ubin in Singapore. The first time I went there, tide was high and we could not see the marine life. Now I realize one must look at the tide chart and choose a date to be able to enjoy marine biodiversity."
..."
more
"I have a mooring. I wanted to confirm my idea of what a tide chart says. It was good to find an easily-read description that had a visual along with the printed word. "
..."
more
"I found this info awesome as a refresher. It had been a good while since I needed this information for fishing."
"I'm surprised I actually learned something on here! Very good information that wasn't too complicated."
