An electrocardiogram (EKG or ECG) is a test that records the electrical activity of your heart. This test can help determine the cause of symptoms you might be having or check the overall health of your heart. Reading a basic EKG is not that hard. However, you should always let your doctor or medical professional properly read your EKG and diagnose you.
Steps
-
Understand the grids of an EKG paper printout. Voltage—the electrical signals of the heart—is measured along the vertical axis; time is measured along the horizontal axis in squares. There are large squares that are divided into smaller squares. [1] X Research source
- Small squares are 1 mm across and represent 0.04 seconds. The large squares measure 5 mm across and represent 0.2 seconds.
- 10 mm in height is equal to 1mV in voltage.
- Interpreting these values will help you determine if the heartbeat is irregular, or too fast or too slow. [2] X Research source
-
Find the QRS complex and label it on the handout. The Q wave is the downward or negative dip right before the large spike. The R wave is right after that, and is usually the largest spike on the readout. Following that is the S wave, which is the dip down below the baseline again. [3] X Research source Label all of these parts on the printout.
- Look at the peaks on the printout. You will need to look at the whole strip to check for an irregular heartbeat.
- This is a pattern called normal sinus rhythm, and it's the basic EKG of a healthy heart. Many people's EKG may vary slightly from this baseline, though, while still being completely healthy.
Advertisement -
Assess your P-waves. Find the P-waves on your EKG. P-waves are the smaller spikes right before the larger spike (the R wave). They should be at the approximately same duration, direction, and shape through the entire EKG. [4] X Research source
- If they are not present, see if there any movement to the line at all, like a flutter, sawtooth lines, or a flat line.
- P-might just be a small rise, or bump, on the graph. They will not be as sharp or as high as the QRS complex.
-
Measure the time between your heartbeats. Locate the beginning of the P wave and the beginning of the QRS complex. This is called the PR interval. Normal duration is between 0.12 to 0.20 seconds, which is three to five small horizontal boxes. [5] X Research source
- This amount of time should be pretty consistent across the entire strip. If there is a varied amount of time (boxes) between beats, it can indicate an irregular heartbeat. This is only something to worry about if your doctor says so. It can be completely harmless.
-
Assess your heart rhythm. You may have a regular or irregular heart rhythm. If your rhythm is irregular, it may be regularly or irregularly. To determine the rhythm, check if the intervals are the same length. Mark a few of your R-R intervals on a separate sheet of paper. Use that sheet of paper to move along the rhythm strip to see if the intervals are all the same lengths. [6] X Research source
- A regularly irregular rhythm has a pattern to the irregular rhythm. An irregularly irregular rhythm has no pattern at all and is all over the place.
-
Calculate your heart rate if the heart rate is regular. You can use the following formula to calculate your heart rate. Count the number of squares between the two peaks (the R waves). Take 300 and divide it by the number of boxes between the 2 peaks. In this diagram, it's 3 boxes, so 300 divided by 3 = 100 BPM. [7] X Research source
- If you counted 4 big boxes between peaks, you have a heart rate of 75 beats per minute (300/4) = 75.
- This is only used for regular heart beats.
-
Calculate your heart rate if the heart rate is irregular. If the peaks aren’t regular and there are different amounts of boxes between them, the heartbeat is irregular. Count the number of spikes that are in a 6-second readout and multiply the number by 10 to get an approximate rate. For example, if there are 7 R waves in a 6 second strip, the heart rate is 70 (7x10=70). [8] X Research source
- Alternately, you can count the complexes on the rhythm strip, which represents 10 seconds. Multiply that number by 6 to find the 60 second heart rate.
-
Ask your doctor about any irregularities. Though everyone’s normal EKG readout can vary, there are some irregularities that your doctor may investigate further. Your doctor will look at your EKG results, combined with your symptoms, and start to form a diagnosis. [9] X Research source
- If the interval between the P and the R is too long, this is called a first degree block. A bundle branch block is when the QRS interval takes longer than 0.12 seconds. Atrial fibrillation is present when an irregular heartbeat occurs when the P waves are non-existent and replaced by a squiggly line.
- Keep in mind that some irregularities may show up on the EKG, but they may be considered normal if you do not have any symptoms, such as dizziness or lightheadedness.
-
Avoid diagnosing yourself. Reading an EKG accurately takes a lot of knowledge and practice. While you can learn how to read your EKG and notice any irregularities, you should never try to diagnose yourself based on the EKG. Instead, you should let your doctor or medical professional diagnose you. [10] X Research source
- Even if you think your EKG is showing irregularities, this does not necessarily mean something is wrong. Everyone has their own unique heart signature.
- If you are worried about something on your readout, talk to your doctor and get them to explain it to you.
Expert Q&A
-
QuestionHow do you start the 12 Lead EKG?Dr. Chris M. Matsko is a retired physician based in Pittsburgh, Pennsylvania. With over 25 years of medical research experience, Dr. Matsko was awarded the Pittsburgh Cornell University Leadership Award for Excellence. He holds a BS in Nutritional Science from Cornell University and an MD from the Temple University School of Medicine in 2007. Dr. Matsko earned a Research Writing Certification from the American Medical Writers Association (AMWA) in 2016 and a Medical Writing & Editing Certification from the University of Chicago in 2017.Once you apply the leads correctly (that is the hard part), all you have to do is press start on the EKG machine. Some machines will even read the EKG for you.
-
QuestionHow to change the setting from pedi to adult?Dr. Chris M. Matsko is a retired physician based in Pittsburgh, Pennsylvania. With over 25 years of medical research experience, Dr. Matsko was awarded the Pittsburgh Cornell University Leadership Award for Excellence. He holds a BS in Nutritional Science from Cornell University and an MD from the Temple University School of Medicine in 2007. Dr. Matsko earned a Research Writing Certification from the American Medical Writers Association (AMWA) in 2016 and a Medical Writing & Editing Certification from the University of Chicago in 2017.There is no change in setting; however, to a trained eye, the two EKG readings will look different.
-
QuestionHow do you check for heart blocks?Dr. Shervin Eshaghian is a Board Certified cardiologist and the owner of Beverly Hills Cardiology based in the Los Angeles, California metro area. Dr. Eshaghian has over 13 years of cardiology experience, including serving on the medical staff at Cedars-Sinai Medical Center. He holds a BS in Psycho-Biology from the University of California, Los Angeles (UCLA) and an MD from the Albert Einstein College of Medicine. Furthermore, Dr. Eshaghian completed an internship, residency, and fellowship at Cedars Sinai Medical Center, where he was awarded the Leo Rigler Outstanding Academic Achievement Award and the Elliot Corday Fellow of the Year Award.An EKG is a tool that can help a doctor or cardiologist identify whether someone's having an irregular heart rhythm such as a heart block.
Video
Tips
- Keep in mind that there are different types of EKGs, such as the EKG strip and EKG 12-lead.Thanks
References
- ↑ https://www.rnceus.com/ekg/ekghowto.html
- ↑ https://nurse.org/articles/how-to-read-an-ECG-or-EKG-electrocardiogram/
- ↑ https://www.southsudanmedicaljournal.com/archive/may-2010/how-to-read-an-electrocardiogram-ecg.-part-one-basic-principles-of-the-ecg.-the-normal-ecg.html
- ↑ https://geekymedics.com/how-to-read-an-ecg/
- ↑ https://www.southsudanmedicaljournal.com/archive/may-2010/how-to-read-an-electrocardiogram-ecg.-part-one-basic-principles-of-the-ecg.-the-normal-ecg.html
- ↑ https://geekymedics.com/how-to-read-an-ecg/
- ↑ https://geekymedics.com/how-to-read-an-ecg/
- ↑ https://geekymedics.com/how-to-read-an-ecg/
- ↑ https://nurse.org/articles/how-to-read-an-ECG-or-EKG-electrocardiogram/
About This Article
To read an EKG, start by finding the voltage, which are the electrical signals of the heart and are measured along the vertical axis. Additionally, identify the squares that measure time along the horizontal axis. You can then see the time between your heartbeats, which should be .12-.20 seconds, in 3-5 small horizontal boxes. Note that this amount of time should be relatively consistent across the entire strip. If you notice a varied amount of time or boxes between beats, it can indicate an irregular heartbeat. For more tips from our Medical reviewer, including how to talk to your doctor about your EKG readout, keep reading!
Reader Success Stories
- "It explains things way better than my cardiologist does; then again, last time I was being seen by him, he spent at least 4 minutes talking to his stock broker, about half of the maybe eight minutes he spent with his patient!" ..." more