Download Article
Download Article
You’re cruising down the road, enjoying your drive, when all of a sudden that most mysterious of indicators turns on: “Check Engine”. What does it mean? The engine is a pretty vast and intricate machine, so “checking the engine” isn’t going to produce many answers. That’s where the OBD-II code reader comes in. This little device will allow you to pinpoint where that error is coming from.
Steps
-
Obtain an OBD-II scan tool. You can find OBD-II scan readers at many online and auto-parts stores. [1] X Expert Source Ed Beery
Automotive Specialist Expert Interview. 19 November 2021. If you have a Bluetooth-enabled smartphone, you can download an app to interpret the data and purchase an OBD reader that will display the codes and explanations directly on your device.- If your car/light truck is older than 1996 you will need to purchase an OBD-I scanner which are more vehicle specific and do not use the universal OBD-II coding system. [2]
X
Expert Source
Ed Beery
Automotive Specialist Expert Interview. 19 November 2021. This article concentrates on the OBD-II system. - OBD-II constantly monitors the performance of your engine and Emissions Control System. It will turn on your Check Engine Light whenever a malfunction occurs that causes the vehicle produced emissions to be greater than or equal to 150% of the Federal EPA mandated limits.
- If your car/light truck is older than 1996 you will need to purchase an OBD-I scanner which are more vehicle specific and do not use the universal OBD-II coding system. [2]
X
Expert Source
Ed Beery
-
Locate the Diagnostic Link Connector (DLC) in your vehicle. This is a somewhat triangular shaped 16-pin connector that is commonly located underneath the left hand side of the dash near the steering column. If you have trouble locating the DLC, search for the location on the internet using your car’s model and year, or refer to the owner’s manual.Advertisement
-
Insert the scan tool connector or code reader into the DLC. Turn your ignition on, but do not start your engine. You will see the scanner begin to communicate with the onboard computers in your vehicle. [3] X Expert Source Ed Beery
Automotive Specialist Expert Interview. 19 November 2021. Messages like "searching for protocol" and "establishing data transmission link" may appear on the scanner's screen.- If the screen stays blank and does not light up, jiggle the connector to achieve a better contact between the scanner and DLC connector pins. Older cars in particular may have poorer connections.
- If you still aren't having any luck, be sure that your cigar lighter works. This is because the OBD-II system uses the cigar lighter circuit to provide voltage to the DLC. If the cigar lighter does not work, locate and check the appropriate fuse.
-
Enter in your vehicle information. On some scanners, you will need to input your VIN as well as the make and model of the vehicle. You may also need to specify the engine type. This process will vary depending on the scanner.
- You can usually find your VIN number on the bottom-left hand side of the windshield.
- VIN numbers are typically stamped on every single part of newer cars. [4]
X
Expert Source
Audra Fordin
Certified Automotive Technician Expert Interview. 13 January 2022.
-
Find the menu. When the scanner finishes booting up, look for a menu. Select “Codes” or “Trouble Codes” to open the main Codes menu. Depending on your scanner and year of the vehicle you may be presented with a few systems such as Engine/Powertrain, Transmission, Airbag, Brakes etc. When you pick one, you will see two or more types of codes. The most common are Active codes and Pending codes.
- Active codes are live codes or malfunctions that are keeping your Check Engine Light on. Just because your Check Engine Light is off doesn't mean the code or malfunction disappeared, it just means that the code setting conditions haven't occurred for two or more operations of the vehicle.
- Pending codes mean that the OBD-II monitoring system has failed the operation of an emission control system at least once and if it fails again the Check Engine Light will be turned on and the malfunction becomes an Active code.
Advertisement
-
Learn what the letter means. Each code will start with a letter which designates what system the code is referring to. There are several letters that you may see, though you may have to move to different menus to see them:
- P - Powertrain. This covers the engine, transmission, fuel system, ignition, emissions, and more. This is the largest set of codes.
- B - Body. This covers airbags, seat belts, power seating, and more.
- C - Chassis. These codes cover ABS, brake fluid, axles, and more.
- U - Undefined. These codes cover other aspects of the car.
-
Learn what the numbers mean. P0xxx, P2xxx, and P3xxx are all generic codes that apply to all makes and models. P1xxx codes are manufacturer specific, such as Honda, Ford, Toyota, etc. The second number tells you what subsystem the code refers to. For example, P07xx codes refer to the transmission.
- The last two digits are the specific problem that the code refers to. Check a code chart online for details on each specific code.
-
Read an example code. P0301 indicates a misfire condition on cylinder #1. The P indicates it's a powertrain code, the 0 indicates that it is a generic or universal code. The 3 means the area or subsystem is an Ignition System code. [5] X Research source
- The 01 indicates it's a cylinder specific problem, in that there is a misfire condition in the number 1 cylinder. It could mean that the spark plug, plug wire or dedicated ignition coil are worn out or that there is a vacuum leak near the cylinder.
- A code does not tell you what component is defective; it only points to or indicates that a component, its circuit, or its wiring/vacuum control are malfunctioning. The code may be the symptom of a malfunction caused by a completely different system.
-
Diagnose your vehicle. The proper diagnosis of OBD-II codes takes years of training and practice. For example, a weak battery or worn out alternator can set five or more codes in systems that are perfectly normal. Before attempting repairs, understand that the codes alone will not tell you what parts need to be replaced or what repairs need to be made.
- If you are unsure of what you are doing, take your car to an ASE Certified Master Technician with the L1 Advanced Engine Performance Diagnostic certification, or you could end up wasting a lot of time and money.
-
Reset your Check Engine Light. If you’ve made your repairs, or simply don’t want to see your Check Engine Light for a while, you can reset it using most OBD scanners. The light will turn off until the car has been driven a certain amount of time (this varies from manufacturer to manufacturer). [6] X Research source
- You can reset the Check Engine Light from the main menu of most scanners. It is also referred to as a CEL.
Advertisement
Expert Q&A
Search
-
QuestionHow do I decode OBD codes?Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.Search the code on the internet. This can help you figure out the meaning of the code, along with possible causes and solutions.
-
QuestionHow do I find my OBD port?Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.Check under the dash on the driver's side! This is where most OBDII ports are located.
-
QuestionWhat is OBD device for car?Ed Beery is an Automotive Specialist and the Owner of InTechgrity Automotive Excellence based in Denver, Colorado. With more than eight years of experience, he specializes in providing maintenance and repair services for both individuals and companies. Ed and the InTechgrity Automotive Excellence Team are approved by the American Automobile Association (AAA) for repairs and are Automotive Service Excellence (ASE) certified.An OBD device is better known as OBDII scan tool, which helps pull codes using the OBDII port on a vehicle.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- A code reader is limited in its function to reading codes and clearing codes. They do not provide live data or tell you which diagnostic monitors have failed or completed successfully. Scan tools, which are more expensive and a bit harder to use, can read codes, provide detail about code specifics, read and display live data, and help confirm diagnoses.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Do not think that the code tells you which part to replace. The friendly but usually untrained auto parts clerk will be happy to suggest many parts to try, but this can get very expensive and even confuse the issue.Thanks
- After repairs are performed, a proper drive cycle must be performed to clear all the readiness monitors. So, if needed, an emission test can be performed and passed.Thanks
Advertisement
References
- ↑ Ed Beery. Automotive Specialist. Expert Interview. 19 November 2021.
- ↑ Ed Beery. Automotive Specialist. Expert Interview. 19 November 2021.
- ↑ Ed Beery. Automotive Specialist. Expert Interview. 19 November 2021.
- ↑ Audra Fordin. Certified Automotive Technician. Expert Interview. 13 January 2022.
- ↑ http://www.obd-codes.com/trouble_codes/
- ↑ http://www.popularmechanics.com/cars/how-to/maintenance/4267896
About This Article
Article Summary
X
To read OBD codes for cars made after 1996, you’ll first need to purchase an OBD-II scanner and connect it to your car’s Diagnostic Link Connector, which you can find by consulting either the internet or your owner’s manual. Turn on the ignition without starting the engine to start the link, and navigate to the scanner’s code menu. If you see any “active” or “pending” codes, refer to a code chart to learn more about exactly what and where the malfunction is. Scroll down for an in-depth explanation of the letter and number codes you might see and what they mean!
Did this summary help you?
Thanks to all authors for creating a page that has been read 368,866 times.
Reader Success Stories
- "I'm currently having issues with my car, and a friend let me borrow his code reader. After I connected to my car and the code appeared, I didn't know what it meant, and this article gave me information to understand." ..." more
Advertisement
"I'm currently having issues with my car, and a friend let me borrow his code reader. After I connected to my car and the code appeared, I didn't know what it meant, and this article gave me information to understand."
..."
more
"I am in England and there is never as much information here as there is there. Well done, you really helped and put my mind at rest. You made it so easy, thank you."
..."
more
"I followed the instructions a couple of times and it worked the last time. The engine light went off, thanks."
"Very helpful indeed, in the sense that I can now solve some of the vehicle problems that come my way."
"Tells you how to use a code sensor prior to your car inspection, very helpful."
