Download Article
Download Article
If it's your first time using a calculator, all the buttons and options can be a bit scary. But whether you're using a standard calculator or scientific calculator, the basics are pretty much the same. Once you learn what the buttons do and how to use them for different calculations, you'll be more than comfortable using your calculator whenever you need it—inside or outside of school!
Steps
-
Find the power button if there is one. Although most newer calculators are solar powered—meaning light turns them on automatically—some also have an "ON" or "ON/OFF" button. If you spot any one of these power buttons, press it to turn the calculator on and off. [1] X Research source
- If your calculator has an "ON" button, press it when the calculator is powered on to turn it off.
- Some calculators automatically turn off after remaining unused for a few minutes.
-
Add numbers with the "+" key. Hit the "+" button between any 2 numbers to add them. For example, to add 5 to 10, press "5," "+," and then "10." [2] X Research source
- Add additional numbers to a series. For example, press "+" and "5" to add to the sum of "5 + 10." When you need the final answer, press the "=" button to get the sum of "20."
Advertisement -
Subtract numbers with the "-" key. Press the "-" button between any 2 numbers to subtract the second from the first. For example, hit "7," "-," and then "5" to subtract 5 from 7 and hit "=" to get an answer of "2." [3] X Research source
- Subtract additional numbers from a series. For example, press "-" and "2" to subtract from the sum of "2 – 7" and then press "=" to get a final answer of "0."
- Try subtracting numbers after adding them.
-
Divide numbers or turn fractions into decimals with the "÷" or "/" key. For example, to divide 2 by 1, press "2," "÷," and "1" and then "=." To change the fraction 4/5 to a decimal, press "4," "/," "5," and then "=." [4] X Research source
- If you're using a physical calculator, the division key is likely "÷." For computer calculators, the division key is probably "/."
- Divide in a series by pressing "÷" or "/" followed by a number. For example, if your calculator says "2 ÷ 1," hit "÷," "2," and then "=" to get a final answer of "1."
-
Multiply numbers using the "x" or "*" key. For example, to multiply 6 by 5, press "6," "x," "5," and then "=." The final answer will read "30." [5] X Research source
- Physical calculators often use "x" as a multiplication key, while computer calculators typically use "*."
- Multiply in a series by pressing "x" or "*" followed by a number. For example, if your calculator says "6 x 5," press "x," "2," and then "=" to get a final answer of "60."
-
Press the "=" button to get the answer to an equation. After inputting your equation's numbers and operations, such as addition or subtraction, hit "=" to get the final answer. For example, press "10," "+," "10," and then "=" to get a final answer of "20."
- Remember that you can change your equation without clearing everything after pressing "=" only with ←/→ key, so always double-check your numbers first!
-
Clear your calculator's memory using the "Clear" or "AC" button. Anytime you need to wipe the calculator's memory and anything from the display, press the "AC" or "Clear" button. For example, start by pressing "2," "x," "2," followed by "=". Now you should see "4" on the screen, which is also stored in the memory. Hit the "Clear" button and the number will reset to "0". [6] X Research source
- The "AC" button stands for "All Clear."
- If you hit "+," "-," "x," or "/" after "4" and then try to start a new equation without first hitting "Clear," it will become a part of the current equation. Always hit "Clear" when you need to restart from the middle of a calculation.
-
Press "Backspace," "Delete," or "CE" to clear the last number. If you want to clear the last number on your screen without wiping the whole equation away, hit the "Backspace" or "Delete" button. For example, say you hit "4," "x," "2," but wanted to press "4," "x," "3." Press "Delete" to remove the "2" and then press "3" and you should see "4 x 3" on the display. [7] X Research source
- The "CE" button stands for "Clear Entry."
- If you press "Clear" instead of "Backspace" or "Delete," your equation will reset to "0."
-
Press the ". " button to create decimal numbers. Start by pressing the number before the decimal, hitting the "." button, pressing the number after the decimal, and then hitting the "=" button. For example, to create "50.6," hit "5," "0," ".," "6," and then "=." [8] X Research source
- If you're adding, subtracting, multiplying, or dividing after you create your decimal number, you don't have to hit "=."
- Use the "+," "-," "x," and "÷" buttons to add, subtract, multiply, and divide decimals, respectively.
-
Turn numbers into percentages with the "%" button. Hit the "%" button to divide the number on your screen by 100, which turns it into a percentage. For example, if you want to know what 7 percent of 20 is, start by hitting "7" followed by "%" to get 0.07. Now, hit "x" then "20" to multiply the percentage—0.07—by 20, which gives you your answer: "1.4." [9] X Research source
- To turn a percentage back into a number, multiply it by 100. In the last example, you hit "7" and "%" to get 0.07. Now, hit "x" and then "100" to multiply it by 100 and get the original number: "7."
- You can also simply multiply the number by 0.x, replacing x for the desired percentage. For instance, to know what 15 percent of 40 is, multiply 40 by 0.15.
-
Create fractions using the bracket buttons and the division key. If you live in the U.S., brackets are called parentheses. Always start with a left bracket, "(" followed by the numerator, which is the number above the line. Now, press the "÷" or "/" key and then end by pressing ")." For example, "5/6" is made by hitting "(," "5," "/," "6," and then ")."
- Use the "+," "-," "x," and "÷" buttons to add, subtract, multiply, and divide fractions respectively. Just don't forget to put brackets around each fraction or the calculation will be off!
-
Add and subtract from the calculator's temporary memory with the "M" keys. The "M+" and "M-" buttons add and subtract the number on your screen from the calculator's temporary memory. For example, hit "5" and then "M+" to add 5 to this storage. Now, hit "5" again and press "M-" and you will remove it. [10] X Research source
- Temporary storage isn't affected by the "Clear" or "Backspace" buttons.
- If you want to reset the calculator's temporary memory, press "MC."
- Use the temporary storage to make simple calculations in between more complicated ones.
Advertisement
-
Create the inverse of a number by hitting "1/x" or "x^-1." Also known as the inverse key, this gives you the reciprocal of any number, which is equal to 1 divided by the number. For example, the reciprocal of 2—which in fraction form is 2/1—is 1/2. This means that you can hit "2" and then "1/x" to give you an answer of 1/2 (0.5 in decimal form). [11] X Research source
- Multiplying a number by its reciprocal is always equal to 1.
-
Find the square of a number by pressing "X^2" or "yx." The square of a number is obtained by multiplying the number by itself. For example, the square of 2 is "2 x 2," which is 4. If you press "2" into the calculator and hit "X^2" or "yx," the answer is "4." [12] X Research source
- The second function of the square button is usually "√," which is the square root. The square root is the value that turns the square (such as 4) into its root (in this case 2). For example, the square root of 4 is 2, so pressing "4" and then "√" gives you a final answer of "2."
-
Calculate the exponent of a number by pressing "^," "x^y," or "yX." The exponent (or power) of a number refers to how many times it's multiplied by itself. The exponent key takes the first number (x) and multiplies it by itself a specified number of times as determined by "y." For example, "2^6" is 2 to the power of 6, which is equal to "2 x 2 x 2 x 2 x 2 x 2." This can be calculated with the power button using this order of operations: press "2," press "x^y," press "6," and press "=." The final answer is "64." [13] X Research source
- Any number (x) to the power of 2 is called x squared, while any number (x) to the power of 3 is called x cubed.
- The "^" key is most often found on graphing calculators while the "x^y" and "yX" keys are found on scientific calculators.
-
Calculate scientific notation using the "EE" or "EXP" button. Scientific notation is a method of expressing large numbers—such as 0.0000000057—in a simpler way. In this case, the scientific notation is 5.7 x 10-9. To turn a number into scientific notation, enter the digit number (5.7) and then hit "EXP." Now, press the exponent number (9), the "-" key, and then hit "=." [14] X Research source
- Don't hit the multiply (x) button after hitting "EE" or "EXP."
- Use the "+/-" button to change the sign of the exponent number.
-
Use your calculator for trigonometry with the "sin," "cos," and "tan" buttons. To find the sine, cosine, or tangent of an angle, start by entering the angle value in degrees. Now, press the "sin," "cos," or "tan" button to get the sine, cosine, or tangent, respectively. [15] X Research source
- To convert the sine into an angle, press the sine value and then hit "sin-1" or "arcsin."
- If you want to turn an angle's cosine or tangent into the angle value, press the cosine or tangent value and then press "cos-1" or "arccos."
- If your calculator doesn't have "arcsin," "sin-1," "arccos," or "cos-1" buttons, hit the "function" or "shift" key and then press the standard "sin" or "cos" button to turn their values into angles.
Advertisement
Community Q&A
Search
-
QuestionHow to add fractions on calculator?Joonhyuk ChoiCommunity AnswerCalculators can't show the answer in fraction form, but you will get the answer in decimal form if you added it as: (number/number)+(number/number).
-
QuestionHow do you display the equal sign on a calculator?Community AnswerYou don't. The "equals" sign doesn't display.
-
QuestionHow do you calculate a negative exponent?Community Answer
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.open.edu/openlearn/science-maths-technology/mathematics-statistics/using-scientific-calculator/content-section-1
- ↑ https://www.open.edu/openlearn/science-maths-technology/mathematics-statistics/using-scientific-calculator/content-section-1
- ↑ https://www.open.edu/openlearn/science-maths-technology/mathematics-statistics/using-scientific-calculator/content-section-1
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.mathsisfun.com/decimals.html
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.open.edu/openlearn/science-maths-technology/mathematics-statistics/using-scientific-calculator/content-section-4.2
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ https://www.universalclass.com/articles/math/basic-math/how-to-use-a-calculator.htm
- ↑ http://www.wtamu.edu/academic/anns/mps/math/mathlab/col_algebra/col_alg_tut42_expfun.htm
- ↑ https://www.chem.tamu.edu/class/fyp/mathrev/mr-scnot.html
- ↑ https://www.chem.tamu.edu/class/fyp/mathrev/mr-scnot.html
About This Article
Thanks to all authors for creating a page that has been read 146,222 times.
Advertisement