Download Article
Download Article
Learn how to inflate a balloon in this fun science experiment using these common kitchen ingredients! Balloons inflated this way are filled with carbon dioxide produced by the two ingredients reacting. They do not contain helium, so they will not float.
Steps
-
Pour a little vinegar into a plastic bottle. Choose a plastic water bottle, or another bottle with a narrow neck. Pour 1–2 inches (2.5–5 cm) of vinegar into the bottle, using a funnel if you have one. Use white vinegar, also called distilled vinegar, for the best result. [1] X Research source
- You can try this with any kind of vinegar, but the inflation might take longer or require more vinegar to work. Other types of vinegar tend to be more expensive as well.
- Vinegar can damage metal containers, potentially adding an unpleasant taste to food and drink stored in that container. If you have no plastic bottles, use a high-quality stainless steel bottle to minimize the chance of this happening. Weakening the vinegar with an equal amount of water might also help, and won't prevent the balloon from inflating. [2] X Research source
-
Use a funnel or straw to put a little baking soda into a limp balloon. You can use any shape and color of balloon. Hold it loosely by the neck, with the open side of the balloon facing towards you. Fit a funnel into the neck if you have one, then pour about two tablespoons (30 mL) baking soda into the balloon, or just fill the balloon about halfway full. [3] X Research source
- If you don't have a funnel, you can place a plastic straw into a pile of baking soda, put your finger over the top hole of the straw, then poke the straw into the balloon and lift your finger. Tap the straw to get the baking soda to fall out, and repeat until the balloon is at least 1/3 of the way full. [4] X Research source
Advertisement -
Stretch the neck of the balloon over the top of the bottle. Be careful not to spill the baking soda while you do this. Hold the balloon's neck with both hands and stretch it over the top of the plastic bottle containing vinegar. Have a friend keep the bottle steady if the table or bottle is wobbly. [5] X Research source
-
Lift the balloon up over the bottle and watch the reaction. The baking soda should fall out of the balloon, through the neck of the bottle, and into the vinegar at the bottom. Here, the two chemicals will fizz and react, turning into other chemicals. One of these is carbon dioxide, a gas, which will rise up and inflate the balloon. [6] X Research source
- Shake the bottle gently to mix the two ingredients if there's not much fizzing.
-
Try again with more vinegar or baking soda, if it doesn't work the first time. If the fizzing has stopped and the balloon still hasn't inflated after you count to 100, empty out the bottle and try again with more vinegar and baking soda. The stuff left in the bottle has turned into other chemicals, mostly water, so it can't be used again.
- Don't go overboard. The bottle should never be more than about 1/3 full of vinegar.
Advertisement
-
Learn about chemical reactions. Just about everything around you is made up of molecules, or different types of substances. Often, two kinds of molecules react with each other, breaking up and forming different molecules out of the pieces.
-
Learn about baking soda and vinegar. The reactants , or substances that reacted with each other in the fizzy reaction you saw, are baking soda and vinegar. Unlike many ingredients in your kitchen, both of these are simple chemicals, not complicated mixtures of many chemicals: [7] X Research source
- Baking soda is another word for the molecule sodium bicarbonate .
- White vinegar is a mixture of acetic acid and water. Only the acetic acid reacts with the baking soda.
-
Read about the reaction. Baking soda is a type of substance called a base . Vinegar, or acetic acid, is a type of substance called an acid . Bases and acids react with each other, partially breaking apart and forming different substances. This is described as "neutralization" because the end result is neither a base nor an acid. In this case, the new substances are water, a kind of salt, and carbon dioxide. [8] X Research source Carbon dioxide, a gas, leaves the liquid mixture and expands throughout the bottle and the balloon, inflating it.
- Although the definition of acid and base can get complicated, you can compare the differences between the original substances and the "neutralized" result to see there are obvious changes. For instance, vinegar has a strong smell and can be used to dissolve grime and dirt. After being mixed with baking soda, it smells much less strongly and is no more effective at cleaning than water is.
-
Study the chemical formula. If you're familiar with some chemistry, or curious about how scientists describe reactions, the formula below describes the reaction between sodium bicarbonate NaHCO 3 and acetic acid HC 2 H 3 O 2 (aq). Can you figure out how each molecule splits apart and reforms?
- NaHCO 3 + HC 2 H 3 O 2 (aq) → NaC 2 H 3 O 2 (aq) + H 2 O(l) + CO 2 (g)
- The letters in parentheses show the state the chemicals are in during and after the reaction: (g)as, (l)iquid, or (aq)ueous. "Aqueous" means the chemical is dissolved in water.
Advertisement
Community Q&A
Search
-
QuestionWhat happens if I change the bottle size?Community AnswerIf you reduce the bottle size (volume) without changing the amount of soda and vinegar, then the balloon will blow faster and bigger.
-
QuestionDoes it matter how much baking soda I put in the bottle?Community AnswerYes, because if you put too much it will pop and if you put too little, it will not inflate.
-
QuestionIf the balloon is thick and difficult to blow up, will this still work?Community AnswerYes, it should still work correctly.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- This method can also be used in homemade cardboard or plastic rockets and you can make them go a long way if ingredients are out right. The reason it blows up is because the reaction creates gas, and the pressure builds up.Thanks
- You can use lime juice instead of vinegar.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If the balloon is fully inflated and the liquid is still fizzing, the balloon might be about to explode. Decide whether you have time to pull off the balloon, or whether you should just cover your face before it gets spattered!Thanks
Advertisement
Things You'll Need
- Balloon
- Vinegar
- Baking Soda
- Bottle with narrow neck
- Funnel (optional)
- Towel
References
- ↑ https://www.cityofsacramento.org/-/media/Corporate/Files/ParksandRec/4thR/4r-SAH2-BakingSodaVinegarBalloonExp.pdf?la=en
- ↑ https://www.exploratorium.edu/science_explorer/balloon_blowup.html
- ↑ http://www.education.com/science-fair/article/balloon-gas-chemical-reaction/
- ↑ https://www.exploratorium.edu/science_explorer/balloon_blowup.html
- ↑ https://www.education.com/science-fair/article/balloon-gas-chemical-reaction/
- ↑ https://www.pbs.org/parents/crafts-and-experiments/inflate-a-balloon-with-baking-soda-and-vinegar
- ↑ https://www.cmosc.org/balloon-blow-up-science-experiment/
- ↑ https://www.cityofsacramento.org/-/media/Corporate/Files/ParksandRec/4thR/4r-SAH2-BakingSodaVinegarBalloonExp.pdf?la=en
About This Article
Article Summary
X
To blow up a balloon with baking soda and vinegar, pour 1–2 inches of white vinegar into a plastic bottle. Next, hold a balloon loosely by the neck, fit a funnel or plastic straw into it, and pour 2 tablespoons of baking soda through it into the balloon. Then, stretch the neck of the balloon over the top of the bottle before lifting the balloon up over the bottle. The baking soda will fall out of the balloon, through the neck of the bottle, and into the vinegar. The 2 ingredients will fizz and react to create carbon dioxide, which will then inflate your balloon! If you want to learn more about the chemical reaction that occurs, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 416,603 times.
Reader Success Stories
- "It's a perfect solution for my science fair project. It's really great, thank you for writing this article." ..." more
Advertisement
"It's a perfect solution for my science fair project. It's really great, thank you for writing this article."
..."
more
"The amounts of baking soda and vinegar to use helped. Other articles did not say specific amounts."
"Thank you, this was for my daughter's science project."
"It helped me with my science fair project, thank you."
"Love how well the experiment was explained."
