Download Article
Everything you need to know to calculate instantaneous velocity
Download Article
Velocity is defined as the speed of an object in a given direction. [1] X Research source In many common situations, to find velocity, we use the equation v = s/t, where v equals velocity, s equals the total displacement from the object's starting position, and t equals the time elapsed. However, this technically only gives the object's average velocity over its path. Using calculus, it's possible to calculate an object's velocity at any moment along its path. This is called instantaneous velocity and it is defined by the equation v = (ds)/(dt) , or, in other words, the derivative of the object's average velocity equation. [2] X Research source
Steps
-
Start with an equation for velocity in terms of displacement. To get an object's instantaneous velocity, first we have to have an equation that tells us its position (in terms of displacement) at a certain point in time. This means the equation must have the variable s on one side by itself and t on the other (but not necessarily by itself), like this:
s = -1.5t 2 + 10t + 4
- In this equation, the variables are:
-
- Displacement = s . The distance the object has traveled from its starting position. [3] X Research source For example, if an object goes 10 meters forward and 7 meters backward, its total displacement is 10 - 7 = 3 meters (not 10 + 7 = 17 meters).
- Time = t . Self explanatory. Typically measured in seconds.
-
- In this equation, the variables are:
-
Take the equation's derivative. The derivative of an equation is just a different equation that tells you its slope at any given point in time. To find the derivative of your displacement formula, differentiate the function with this general rule for finding derivatives: If y = a*x n , Derivative = a*n*x n-1 .This rule is applied to every term on the "t" side of the equation. [4] X Research source
- In other words, start by going through the "t" side of your equation from left to right. Every time you reach a "t", subtract 1 from the exponent and multiply the entire term by the original exponent. Any constant terms (terms which don't contain "t") will disappear because they be multiplied by 0. This process isn't actually as hard as it sounds — let's derive the equation in the step above as an example:
s = -1.5t 2 + 10t + 4
(2)-1.5t (2-1) + (1)10t 1 - 1 + (0)4t 0
-3t 1 + 10t 0
-3t + 10
Advertisement - In other words, start by going through the "t" side of your equation from left to right. Every time you reach a "t", subtract 1 from the exponent and multiply the entire term by the original exponent. Any constant terms (terms which don't contain "t") will disappear because they be multiplied by 0. This process isn't actually as hard as it sounds — let's derive the equation in the step above as an example:
-
Replace "s" with "ds/dt." To show that our new equation is a derivative of the first one, we replace "s" with the notation "ds/dt". Technically, this notation means "the derivative of s with respect to t." A simpler way to think of this is just that ds/dt is just the slope of any given point in the first equation. For example, to find the slope of the line made by s = -1.5t 2 + 10t + 4 at t = 5, we would just plug "5" into t in its derivative. [5] X Research source
- In our running example, our finished equation should now look like this:
ds/dt = -3t + 10
- In our running example, our finished equation should now look like this:
-
Plug in a t value for your new equation to find instantaneous velocity. [6] X Research source Now that you have your derivative equation, finding the instantaneous velocity at any point in time is easy. All you need to do is pick a value for t and plug it into your derivative equation. For example, if we want to find the instantaneous velocity at t = 5, we would just substitute "5" for t in the derivative ds/dt = -3 + 10. Then, we'd just solve the equation like this:
ds/dt = -3t + 10
ds/dt = -3(5) + 10
ds/dt = -15 + 10 = -5 meters/second- Note that we use the label "meters/second" above. Since we're dealing with displacement in terms of meters and time in terms of seconds and velocity in general is just displacement over time, this label is appropriate.
Advertisement
-
Graph your object's displacement over time. In the section above, we mentioned that derivatives are just formulas that let us find the slope at any point for the equation you take the derivative for. [7] X Research source In fact, if you represent an object's displacement with a line on a graph, the slope of the line at any given point is equal to the object's instantaneous velocity at that point. [8] X Research source
- To graph an object's displacement, use the x axis to represent time and the y axis to represent displacement. Then, just plot points by plugging values for t into your displacement equation, getting s values for your answers, and marking the t,s (x,y) points on the graph.
- Note that the graph can extend below the x axis. If the line representing your object's motion drops below the x axis, this represents your object moving behind where it started. Generally, your graph won't extend behind the y axis - we don't often measure velocity for objects moving backward in time!
-
Choose one point P and a point Q that is near it on the line. To find a line's slope at a single point P, we use a trick called "taking a limit." Taking a limit involves taking two points (P, plus Q, a point near it) on the curved line and finding the slope of the line linking them over and over again as the distance between P and Q gets smaller. [9] X Research source
- Let's say that our displacement line contains the points (1,3) and (4,7). In this case, if we want to find the slope at (1,3), we can set (1,3) = P and (4,7) = Q .
-
Find the slope between P and Q. The slope between P and Q is the difference in y-values for P and Q over the difference in x-values for P and Q. In other words, H = (y Q - y P )/(x Q - x P ) , where H is the slope between the two points. [10] X Research source In our example, the slope between P and Q is:
H = (y Q - y P )/(x Q - x P )
H = (7 - 3)/(4 - 1)
H = (4)/(3) = 1.33 -
Repeat several times, moving Q nearer to P. Your goal here is to make the distance between P and Q smaller and smaller until it gets close to a single point. The smaller the distance between P and Q gets, the closer the slope of your tiny line segments will be to the slope at point P. Let's do this a few times for our example equation, using the points (2,4.8), (1.5,3.95), and (1.25,3.49) for Q and our original point of (1,3) for P:
Q = (2,4.8): H = (4.8 - 3)/(2 - 1)
H = (1.8)/(1) = 1.8
Q = (1.5,3.95): H = (3.95 - 3)/(1.5 - 1)
H = (.95)/(.5) = 1.9
Q = (1.25,3.49): H = (3.49 - 3)/(1.25 - 1)
H = (.49)/(.25) = 1.96 -
Estimate the slope for an infinitely small interval on the line. As Q gets closer and closer to P, H will get closer and closer to the slope at point P. Eventually, at an infinitely small interval, H will equal the slope at P. Because we aren't able to measure or calculate an infinitely small interval, we just estimate the slope at P once it's clear from the points we've tried. [11] X Research source
- In our example, as we moved Q closer to P, we got values of 1.8, 1.9, and 1.96 for H. Since these numbers appear to be approaching 2, we can say that 2 is a good estimate for the slope at P.
- Remember that the slope at a given point on a line is equal to the derivative of the line's equation at that point. Since our line is showing our object's displacement over time and, as we saw in the section above, an object's instantaneous velocity is the derivative of its displacement at a given point, we can also say that 2 meters/second is a good estimate for the instantaneous velocity at t = 1.
Advertisement
-
Find the instantaneous velocity at t = 4 given the displacement equation s = 5t 3 - 3t 2 + 2t + 9. This is just like our example in the first section, except that we're dealing with a cubic equation rather than a quadratic equation, so we can solve it in the same way.
- First, we'll take our equation's derivative:
s = 5t 3 - 3t 2 + 2t + 9
s = (3)5t (3 - 1) - (2)3t (2 - 1) + (1)2t (1 - 1) + (0)9t 0 - 1
15t (2) - 6t (1) + 2t (0)
15t (2) - 6t + 2 - Then, we'll plug in our value for t (4):
s = 15t (2) - 6t + 2
15(4) (2) - 6(4) + 2
15(16) - 6(4) + 2
240 - 24 + 2 = 218 meters/second
- First, we'll take our equation's derivative:
-
Use graphical estimation to find the instantaneous velocity at (1,3) for the displacement equation s = 4t 2 - t. For this problem, we'll use (1,3) as our P point, but we'll have to find a few other points near it to use as our Q points. Then, it's just a matter of finding our H values and making an estimation.
- First, let's find Q points at t = 2, 1.5, 1.1 and 1.01.
s = 4t 2 - t
t = 2: s = 4(2) 2 - (2)
4(4) - 2 = 16 - 2 = 14, so Q = (2,14)
t = 1.5: s = 4(1.5) 2 - (1.5)
4(2.25) - 1.5 = 9 - 1.5 = 7.5, so Q = (1.5,7.5)
t = 1.1: s = 4(1.1) 2 - (1.1)
4(1.21) - 1.1 = 4.84 - 1.1 = 3.74, so Q = (1.1,3.74)
t = 1.01: s = 4(1.01) 2 - (1.01)
4(1.0201) - 1.01 = 4.0804 - 1.01 = 3.0704, so Q = (1.01,3.0704) - Next, let's get our H values:
Q = (2,14): H = (14 - 3)/(2 - 1)
H = (11)/(1) = 11
Q = (1.5,7.5): H = (7.5 - 3)/(1.5 - 1)
H = (4.5)/(.5) = 9
Q = (1.1,3.74): H = (3.74 - 3)/(1.1 - 1)
H = (.74)/(.1) = 7.3
Q = (1.01,3.0704): H = (3.0704 - 3)/(1.01 - 1)
H = (.0704)/(.01) = 7.04 - Since our H values seem to be getting very close to 7, we can say that 7 meters/second is a good estimate for the instantaneous velocity at (1,3).
- First, let's find Q points at t = 2, 1.5, 1.1 and 1.01.
Advertisement
Community Q&A
Search
-
QuestionWhat is the difference between instantaneous and average velocity?Community AnswerInstantaneous is at that moment, whereas average is the mean of the entire time span.
-
QuestionHow do I calculate instantaneous acceleration?Community AnswerInstantaneous acceleration can be considered as the value of the derivative of the instantaneous velocity. For example: s = 5(t^3) - 3(t^2) + 2t + 9 v = 15(t^2) - 6t + 2 a = 30t - 6 If we want to know the instantaneous acceleration at t = 4, then a(4) = 30 * 4 - 6 = 114 m/(s^2)
-
QuestionWhen is instantaneous velocity and average velocity the same?Community AnswerInstantaneous velocity tells you the velocity of an object at a single moment in time. If the object is moving with a constant velocity, then the average velocity and instantaneous velocity will be the same. In all situations, they are not likely to be the same.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- To find acceleration (the change in velocity over time), use the method in part one to get a derivative equation for your displacement function. Then, take another derivative, this time of your derivative equation. This will give you an equation for finding acceleration at a given time - all you have to do is plug in your value for time.Thanks
- The equation which relates Y (displacement) to X (time) might be really simple, like, for instance, Y= 6x + 3. In this case the slope is constant and it is not necessary to find a derivative to find the slope, which is, following the Y = mx + b basic model for linear graphs, 6.Thanks
- Displacement is like distance but it has a set direction, this makes displacement a vector and speed a scalar. Displacement can be negative while distance will only be positive.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.physicsclassroom.com/class/1dkin/u1l1d.cfm
- ↑ https://byjus.com/physics/instantaneous-speed-and-instantaneous-velocity/
- ↑ https://www.khanacademy.org/science/physics/one-dimensional-motion/displacement-velocity-time/a/what-is-displacement
- ↑ https://openstax.org/books/university-physics-volume-1/pages/3-2-instantaneous-velocity-and-speed
- ↑ https://www.kpu.ca/sites/default/files/Faculty%20of%20Science%20%26%20Horticulture/Physics/Ch12%20-%203%20-%20CurvilinearMotion.pdf
- ↑ https://sciencestruck.com/instantaneous-velocity
- ↑ https://www.mathopenref.com/calcinstantvel.html
- ↑ https://pressbooks.online.ucf.edu/osuniversityphysics/chapter/3-2-instantaneous-velocity-and-speed/
- ↑ https://info.montgomerycollege.edu/_documents/faculty/maronne/math165/section-2-1.pdf
About This Article
Article Summary
X
To calculate instantaneous velocity, start with an equation for velocity in terms of displacement, which should have an "s" on one side for displacement and a "t" on the other for time. Then, take the equation's derivative and replace the "s" with the notation "ds" over "dt." Finally, plug in a "t" value and solve the equation to find the instantaneous velocity at any point in time. To learn how to estimate instantaneous velocity graphically, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,135,998 times.
Reader Success Stories
- "It's overall "straight-up math" and simple general explanation in English. I just turned 70 years old last month. I started thinking about mathematics a few years ago. One day before my 70th birthday, I solved a Rubik's cube. It's never too late." ..." more
Advertisement
"It's overall "straight-up math" and simple general explanation in English. I just turned 70 years old last month. I started thinking about mathematics a few years ago. One day before my 70th birthday, I solved a Rubik's cube. It's never too late."
..."
more
"I have been hitting my head for the first time seeing questions related to this, but this platform helped a lot to understand this concept. Thanks a lot!"
..."
more
"It helped me to understand how to calculate and solve physics problems relating to derivatives."
"Math textbooks suck. If only they had step-by-step instructions like this, go figure. "
"The ease of explanations promotes understanding."
