Download Article
Download Article
It’s important to cook pork thoroughly to avoid getting sick. Generally speaking, all pork needs to be cooked to at least 145 °F (63 °C) to be safe to eat (or 160 °F (71 °C) for ground pork), and a thermometer is the best way to keep track of cooking temperatures as you go. If you don’t have a thermometer, however, there are still ways to know if your pork is cooked enough to be safe to eat.
How to Tell if Pork is Cooked
Pork is cooked through and safe to eat when the internal temperature is at least 145° F (63° C). To check doneness, remove the pork periodically and insert a digital cooking thermometer into the thickest portion of the meat. Or, insert a continuous read thermometer and check it throughout the cooking time.
Steps
Signs that Pork is Cooked
-
Make sure the pork is at least 1 inch (2.5 cm) thick. The pork will need to be thick enough for you to leave the thermometer probe inserted throughout cooking, so some cuts of pork may not be appropriate for a continuous read thermometer. Anything one inch or thicker should be fine. [1] X Research source
- Thin cuts of pork are not well suited for leaving a thermometer inserted throughout cooking.
- Ribs and bacon may be too thin to use a thermometer.
-
Prepare the pork to be cooked. A continuous read thermometer is meant to stay in the pork throughout its cooking time, but you’ll want to do any preparations, brines, and the like before inserting it. [2] X Research source
- You can insert the thermometer first, but it may get in the way of your preparations.
Advertisement -
Insert the thermometer in the thickest part of the meat. You’ll want to stick the thermometer in the middle of the cut of pork, because that’s the last part that will reach proper temperature. [3] X Research source- Keep the thermometer away from bone in the pork, as it may affect its readings.
- If the pork is less than an inch thick, you may be able to insert the thermometer from the side, otherwise, it may be easiest just to insert it from the top.
-
Wait until the thermometer reads at least 140 °F (60 °C). According to the USDA, pork needs to be cooked to between 145 °F (63 °C) and 160 °F (71 °C) in order to be safe to eat. However, you can take the pork out of the oven a few degrees prior to the 145 mark to avoid overcooking. [4] X Research source
- The internal temperature of the pork will continue to rise once you take it out, regardless of whether you cooked it in the oven or a slow cooker.
- Never eat pork that hasn’t had its internal temperature brought up to at least 145 °F (63 °C).
- With ground pork, 160 °F (71 °C) should be treated as the lowest number, rather than 140 °F (60 °C).
-
Take the pork out of the oven and let it sit. Although you may remove the pork a few degrees before it reached the recommended temperature, heat from the outside portions of the meat will continue to spread into the middle, raising the temperature even out of the oven.
- Let a thick cut of pork (1 inch (2.5 cm) or bigger) rest for 15 minutes before eating, but thinner ones will take less time.
- Keep an eye on the thermometer to ensure it passes the 145 °F (63 °C) mark before serving. If it doesn’t, keep cooking it.
Advertisement
-
Cook the pork with the thermometer handy. An instant thermometer isn’t meant to be left in the cut of meat as it cooks. Instead, you will need to periodically insert the thermometer probe into the pork to check its internal temperature. [5] X Research source
- Unlike a continuous read thermometer, an instant thermometer must be inserted and removed each time you check.
- Do not use an instant surface thermometer, as it won’t tell you internal cooking temperatures.
-
Remove the pork from the oven periodically to check the temperature. While some people may want to check the temperature of the pork without pulling the whole pan from the oven, the high temperatures inside the oven make doing so unsafe. [6] X Research source
- Even if you’re not using an oven, remove the pork from the heat source before checking its temperature.
- Checking the temperature while still on the stove or in the oven may also affect the thermometer’s reading.
-
Insert the instant thermometer in the middle of the pork. Like a continuous read thermometer, you’ll want to insert your instant thermometer into the thickest portion of the cut of meat. Keep it away from any bones as that can have an effect on its reading.
- If the meat is less than 1 inch (2.5 cm) thick, you may want to insert the thermometer probe horizontally instead of from the top.
- Be sure to remove the thermometer again before putting the pork back on or in its heat source.
-
Place the pork back in the oven until it reaches at least 140 °F (60 °C). If you’re using a recipe, it may offer guidance as to how long the pork needs to cook, but you should not rely on the timeframe provided. Check the pork periodically and continue cooking it until it hits a minimum of 140 °F (60 °C), or 160 °F (71 °C) for ground pork. [7] X Research source
- Remember, the pork will continue to cook after you remove it from the heat source.
-
Remove the pork from the oven and let it sit. Once the pork is about 5 °F (−15 °C) below the preferred internal temperature, remove it from the heat source and let it sit for a few minutes before serving. Remember, the internal temperature must reach at least 145 °F (63 °C), so keep an eye on it to ensure it does. [8] X Trustworthy Source FoodSafety.gov Online portal combining food safety information from the U.S. Food and Drug Administration, the Food Safety and Inspection Service, and the Centers for Disease Control and Prevention Go to source
- An internal temperature of 145 °F (63 °C) would be considered “rare,” so you may choose to cook it longer.
- A temperature of 160 °F (71 °C) is usually considered well done.
- You don’t need to let ground pork sit after it’s done cooking.
Advertisement
-
Check to see if the juices are clear. Although thermometers are the best way to determine if your pork is done cooking, you can gauge the doneness of pork by the color of the juices that come out of it when you poke a hole in it with a knife or fork. [9] X Research source
- If the juices that come out of the pork run clear or are very faintly pink, the pork is done cooking.
- If the juices are not clear, continue cooking the pork and check again later.
-
Use a long knife to see if the pork is still tough inside. If you are slow cooking the pork, it will reach the necessary internal temperature long before the meat is as tender as you may intend. Use a long knife or a skewer to puncture the middle of the pork and assess the resistance it gives you as you press it in. [10] X Research source
- If the knife or skewer slides in and out easily, the center of the pork has become tender.
- If you hit resistance, allow the pork to continue to cook and try again after a few minutes.
-
Cut into the pork to see if it’s opaque. For some cuts of pork not thick enough for thermometers, this may be your only way to assess doneness. Cut a slit into the thickest part of the pork, then pull it apart with a knife and fork to gauge its internal color. [11] X Research source
- The pork should be opaque (solid in color) and may have a slight pinkish tint when done.
- Very thin cuts of pork like sliced bacon can be checked without cutting into them.
-
Compare the pork’s firmness to the palm of your hand. For cuts of pork like chops and steaks, you can usually assess the meat’s doneness by pressing firmly into it with your tongs or fingers. Properly cooked pork will feel firm and quickly spring back into shape after you pull your fingers away. The pork should feel as firm as the center of your outstretched palm.
- If any juices squeeze out, they should be clear when the pork is done cooking.
- If the pork feels soft to the touch, it needs to keep cooking.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Pork is considered “rare” at 145 °F (63 °C), “medium” at around 150 °F (66 °C)-155 °F (68 °C), and “well done” at 160 °F (71 °C).Thanks
- Always wash your hands after handling undercooked or raw pork.Thanks
- Digital thermometers are considered the most accurate way to determine meat’s internal temperatures.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
- Instant or continuous read thermometer
- Oven mitts
- Baking sheet or frying pan
- Knife or skewer
References
- ↑ https://www.recipetips.com/kitchen-tips/t--461/pork-doneness.asp
- ↑ https://www.pork.org/cooking/pork-temperature/
- ↑ https://www.epicurious.com/expert-advice/how-to-use-a-meat-thermometer-article
- ↑ https://www.recipetips.com/kitchen-tips/t--461/pork-doneness.asp
- ↑ https://www.epicurious.com/expert-advice/how-to-use-a-meat-thermometer-article
- ↑ https://www.recipetips.com/kitchen-tips/t--461/pork-doneness.asp
- ↑ https://www.epicurious.com/expert-advice/how-to-use-a-meat-thermometer-article
- ↑ https://www.foodsafety.gov/keep/charts/mintemp.html
- ↑ https://www.recipetips.com/kitchen-tips/t--461/pork-doneness.asp
About This Article
Article Summary
X
The easiest, safest way to tell if pork is cooked through is by using a thermometer. Just insert the thermometer in the thickest part of the meat since that’s the last part to reach the proper temperature. Wait until the thermometer reads at least 140 degrees Fahrenheit before taking it out of the oven. If you don't have a thermometer, you can also see if the juices are clear or light pink, which is a sign that the meat is fully cooked. You can also insert a knife into the pork to check for a tender middle. To learn how to tell if your pork is done by its internal color, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 322,669 times.
Advertisement
